PicC 9.50 dsPIC Manual.pdf

Error and Warning Messages(506) record too long: *+* (Linker)This is an internal compiler error. Contact HI-TECH Software technical support with details.(507) unexpected end of file (Linker)This is an internal compiler error. Contact HI-TECH Software technical support with details.(508) relocation offset * out of range 0..*-*-1 (Linker)This is an internal compiler error. Contact HI-TECH Software technical support with details.(509) illegal relocation size: * (Linker)There is an error in the object code format read by the linker. This either means you are usinga linker that is out of date, or that there is an internal error in the assembler or linker. ContactHI-TECH Support with details if the object file was created by the compiler.(510) complex relocation not supported for -r or -l options (Linker)The linker was given a -R or -L option with file that contain complex relocation.(511) bad complex range check (Linker)This is an internal compiler error. Contact HI-TECH Software technical support with details.(512) unknown complex operator 0x* (Linker)This is an internal compiler error. Contact HI-TECH Software technical support with details.(513) bad complex relocation (Linker)The linker has been asked to perform complex relocation that is not syntactically correct. Probablymeans an object file is corrupted.(514) illegal relocation type: * (Linker)An object file contained a relocation record with an illegal relocation type. This probably means thefile is corrupted or not an object file. Contact HI-TECH Support with details if the object file wascreated by the compiler.294