PicC 9.50 dsPIC Manual.pdf

Error and Warning Messages(525) too many address spaces - space * ignored (Linker)The limit to the number of address spaces (specified with the PSECT assembler directive) is currently16.(526) psect * not specified in -p option (first appears in *) (Linker)This psect was not specified in a -P or -A option to the linker. It has been linked at the end of theprogram, which is probably not where you wanted it.(528) no start record: entry point defaults to zero (Linker)None of the object files passed to the linker contained a start record. The start address of the programhas been set to zero. This may be harmless, but it is recommended that you define a start address inyour startup module by using the END directive.(593) can’t find 0x* words (0x* withtotal) for psect * in segment * (Linker)See error (492) in Appendix B.(596) segment *(*-*) overlaps segment *(*-*) (Linker)The named segments have overlapping code or data. Check the addresses being assigned by the -Plinker option.(597) can’t open (Linker)An object file could not be opened. Confirm the spelling and path of the file specified on the commandline.(602) null format name (Cromwell)The -I or -O option to Cromwell must specify a file format.(603) ambiguous format name "*" (Cromwell)The input or output format specified to Cromwell is ambiguous. These formats are specified withthe -ikey and -okey options respectively.296