PicC 9.50 dsPIC Manual.pdf

Error and Warning Messages(619) I/O error reading symbol tableCromwell could not read the symbol table. This could be because the file was truncated or there wassome other problem reading the file. Contact HI-TECH Support with details.(620) file name index out of range in line number record (Cromwell)The COD file has an invalid format in the specified record.(625) too many files in COFF file (Cromwell)This is an internal compiler error. Contact HI-TECH Software technical support with details.(626) string lookup failed in coff:get_string() (Cromwell)This is an internal compiler error. Contact HI-TECH Software technical support with details.(634) error dumping * (Cromwell)Either the input file to CROMWELL is of an unsupported type or that file cannot be dumped to thescreen.(635) invalid hex file: *, line * (Cromwell)The specified HEX file contains an invalid line. Contact HI-TECH Support if the HEX file wasgenerated by the compiler.(636) checksum error in Intel hex file *, line * (Cromwell)A checksum error was found at the specified line in the specified Intel hex file. The HEX file maybe corrupt.(674) too many references to * (Cref)This is an internal compiler error. Contact HI-TECH Software technical support with details.(675) can’t open * for input (Cref)CREF cannot open the specified input file. Confirm the spelling and path of the file specified on thecommand line.298