PicC 9.50 dsPIC Manual.pdf

Error and Warning Messages(418) image too big (Objtohex)This is an internal compiler error. Contact HI-TECH Software technical support with details.(419) object file is not absolute (Objtohex)The object file passed to OBJTOHEX has relocation items in it. This may indicate it is the wrong objectfile, or that the linker or OBJTOHEX have been given invalid options. The object output files fromthe assembler are relocatable, not absolute. The object file output of the linker is absolute.(420) too many relocation items (Objtohex)This is an internal compiler error. Contact HI-TECH Software technical support with details.(421) too many segments (Objtohex)This is an internal compiler error. Contact HI-TECH Software technical support with details.(422) no end record (Linker)This object file has no end record. This probably means it is not an object file. Contact HI-TECHSupport if the object file was generated by the compiler.(423) illegal record type (Linker)There is an error in an object file. This is either an invalid object file, or an internal error in the linker.Contact HI-TECH Support with details if the object file was created by the compiler.(424) record too long (Objtohex)This is an internal compiler error. Contact HI-TECH Software technical support with details.(425) incomplete record (Objtohex, Libr)The object file passed to OBJTOHEX or the librarian is corrupted. Contact HI-TECH Support withdetails.(426) can’t open checksum file * (Linker)The checksum file specified to OBJTOHEX could not be opened. Confirm the spelling and path ofthe file specified on the command line.280