bremer VIVA

6.4 Deliming and cleaning the hot water / steamoutlet (add. feature)−only in case of lime deposits and furringCAUTIONRisk of scalding in case of unintentional hot water outlet!Before decalcifying the hot water outlet, switch off the VIVA KM viathe on−off switchScrew off the cone and nozzle only if the machine is switched off andcooled.hot waterdispensersteam dispenserconeO-ringsteamnozlehot water nozzleoutlet withscreen andgasket Remove clockwise manually− on the left hand side : cone with hotwater nozzle, outlet with screen, gasket− on the right hand side : steam nozzle Remove these parts manually. Use a needle−nosed pliers to remove the hotwater nozzle. Except the gasket and O−rings put allremoved parts into a solution with Bremexand water for approx. 10 minutes. After that rinse thorougly with clear water. Assemble and screw all parts tightly. Clean the hot water and steam dispenserwith a damp cloth. Use hot water and steamto remove cleaning residues.27