Re:connect M 203 Loewe Interface - Revox

M203 Loewe Re:connect
Connection:
M203 with M51
Socket: M51 LINK IN
The M203 interface is
connected to the M51 LINK
socket on the back of the M51
with the telephone cable
supplied.
If you want to use a different
cable for some reason, you
should use only a noncrossed,
4-core telephone
cable with an RJ11 plug (6P4C
modular).
Cables up to 100* metres in
length can be used.
Connection:
M203 with external interfaces
Socket: M51 LINK OUT
The M51 LINK can be used to
connect additional external
interfaces to the M203 interface.
These could, for example, be
the M201 IR interface, a M200
Domotic interface, a M202
Ethernet interface or simply an
additional M203.
You should use only a noncrossed,
4-core telephone
cable with an RJ11 plug (6P4C
modular) for this connection.
* Max. cable resistance: 0.1 Ω /m
4
Connection:
M203 with seriell interface
Socket: RS232
The M203 Interface can be
used with other (TV) devices,
which also have a serial interface.
In this way, TV units from Loewe
and Pioneer as well (using M203
Pioneer), can be conveniently
integrated into the Revox world.
Which models are supported and
how the integration is achieved is
described, starting from Page 6.
The M203 Interface is also
suitable as an interface to
domestic facility management
systems such as AMX or
Crestron, which have a special
Revox protocol.
Even a Windows PC with the
M230 control program can be
connected to the serial interface
on the M203.
You will find further information
from Page 5.
Serial cables with a maximum
length of 10 metres can be used.