Re:connect M 203 Loewe Interface - Revox

M203 Loewe Re:connect
Video Controller.
If a device controller was
selected as Port Mode on page
#1, a second menu page,
Setup #2 is available. This
page enables you to selectively
switch on and/or between video
inputs on a Loewe TV or an
HDMI Switcher from the Gefen
company, dependant on the
selected M51 source.
Example:
A SAT receiver can conveniently
be integrated through the
automatic selection of the video
input on the TV by the M51. Its
picture output is connected, for
example, to the S-Video input on
the plasma TV, while the audio
signal is connected to the Optical
digital input on the M51.
Please also refer to the picture on
the next page.
If you now select the source SAT
(Optical) at the M51, the plasma
TV automatically transmits the
SAT receiver picture over the
S-Video input
8
and the sound from the SAT
receiver is transmitted over the
M51.
The convenient integration can
of course also be used for the
M51’s integrated DVD player. In
this case, you only need to
establish a video connection
between the M51 and the TV.
Please refer to the picture on
the next page – Connection :
Video 1).
IR Link
The infrared interface IR Link
was integrated especially for the
video controller. Connect the
small M204 IR receiver, which
is available in four different
models, to the IR Link and
locate it near to the TV. Now
you can locate the M51 in a
concealed location or outside
the normal range of your remote
control, without having to forego
any of the convenience of using
the remote control.
�
An M218 wall-mounted remote
control, with integrated IR
receiver, can be connected
instead of the M204 IR receiver.