24.11.2012 Views

Re:connect M 203 Loewe Interface - Revox

Re:connect M 203 Loewe Interface - Revox

Re:connect M 203 Loewe Interface - Revox

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

M<strong>203</strong> <strong>Loewe</strong> <strong>Re</strong>:<strong>connect</strong><br />

Slot Selection<br />

If a second M<strong>203</strong> (M200) is<br />

<strong>connect</strong>ed to the M51 Link<br />

output, a different address must<br />

be assigned through the slot<br />

selection so that both M<strong>203</strong>s don’t<br />

occupy the same slot address.<br />

This would cause errors. In the<br />

case of a double assignment,<br />

neither of the two M<strong>203</strong>s would be<br />

shown in the M51 Version list.<br />

Slot addresse: #11 or #12<br />

Important:<br />

Only one M<strong>203</strong> may be <strong>connect</strong>ed<br />

to the M51 Link for the<br />

address selection. You should<br />

separate the one M<strong>203</strong> from the<br />

M51 Link while assigning the<br />

address to the other. If the<br />

addresses are correctly set, both<br />

M<strong>203</strong>s (M200) will appear in the<br />

M51 version list.<br />

You will find further information<br />

on this topic in the M51 manual<br />

in the Introduction chapter<br />

under the Version function.<br />

6<br />

Serial Port Mode<br />

The function of the serial interface<br />

(Serial Port) can be configured<br />

for the following<br />

applications:<br />

• RS-232 Link<br />

• RS-232 Filtered<br />

Video Control of:<br />

• Gefen HDMI Switcher 4x2, 4x1<br />

• Gefen HDMI Switcher 6x2<br />

• <strong>Loewe</strong> Individual Compose 40*<br />

• <strong>Loewe</strong> Individual Compose 46*<br />

* In order to ensure problem-free operation,<br />

the <strong>Loewe</strong> Individual Compose<br />

must meet the following requirements:<br />

<strong>Loewe</strong> TV Service Menu: System data<br />

TV application software version: ≥ V2.2.x<br />

Firmware I2CUART version: ≥ V3.1.x<br />

As an option, it is also possible to<br />

purchase a licence, with which the<br />

following plasma devices from the<br />

Pioneer company can be operated:<br />

• Pioneer PDP 5000 EX<br />

• Pioneer PDP 506 FDE<br />

• Pioneer PDP 506 XDE - Cabel<br />

• Pioneer PDP 506 XDE - DVBT<br />

• Pioneer PDP 507 XA<br />

• Pioneer PDP 507 XD<br />

• Pioneer PDP 60 MXE20<br />

• Pioneer PDP 615 EX<br />

(Status quo July 2007)

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!