573-093-00 : Seiko-Epson NS5000-6000 Handler I-F ... - Zzybot.net
573-093-00 : Seiko-Epson NS5000-6000 Handler I-F ... - Zzybot.net
573-093-00 : Seiko-Epson NS5000-6000 Handler I-F ... - Zzybot.net
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
NS5<strong>00</strong>0/6<strong>00</strong>0 <strong>Handler</strong> Interface Manual for the Catalyst Test System4) Using the drill bit provided in the thread repair kit (pn 480-235-03), drill through theholes in the bushings that are located at each corner of the drill jig (see Figure 6). Drillto a depth of one and five-eights inches (1 5/8’’) (See Figure 7).When drilling:• Do not damage cables or hoses on the other side of the large base plate.• Be sure to keep the drill perpendicular to the drill jig.• Prevent metal chips from contaminating the inner workings of the handler bycovering the hole with sponge foam just after the drill breaks through the large baseplate. Use a vacuum to cleanup the debris as each hole is drilled.Bushing (4X)Drill JigCaptive M5 ScrewsFigure 6 Securing the Drill JigStiffener<strong>Handler</strong> BasePlate1 5/8 inchesDrill JigDrill BitFigure 7 Drill Depth of One and Five-Eights Inches (1 5/8”)11
Change language