573-093-00 : Seiko-Epson NS5000-6000 Handler I-F ... - Zzybot.net

More documents

Recommendations

Info

NS5000/6000 Handler Interface Manual for the Catalyst Test System5) Remove the drill jig by unscrewing the two captive M5 screws (see Figure 6).6) Thread the four new holes with a tap wrench and the tap from the thread repair kit.NoteMake sure that the tap remains perpendicular to the large base plate and thatthe tap goes completely through the large handler base plate.7) Install one threaded insert (3/8-inch long) from the thread repair kit into each of the fourmounting holes. Use the insert installation tool provided in the thread repair kit.Remove the tang of the insert once the insert is installed to the proper depth.8) Tighten (to 29 in-lbs) the four M5 fasteners that hold the two fixture plates to the largebase plate (see Figure 8).Fixture Plate Fasteners (X4)Figure 8 Tighten the Fixture Plate Fasteners12
NS5000/6000 Handler Interface Manual for the Catalyst Test SystemInstallationNoteUse proper equipment and care to make sure that you do not exceed theindicated torque values in the Installation section. Refer to Table 6 on page 5for torque specifications.An exploded view of the interface assembly is seen in Figure 9.Seiko-Epson HandlerDrill Jig*(PN 480-073-00-00)Guide Pin(PN 480-018-02) (X2)Interface Alignment Fixture*(PN 480-074-00)V-groove(PN 804-887-00) (X3)Interface Assembly Plate(PN 480-042-02)Adaptive Spacer(PN 480-049-XX) (X3)Native Groove Spacer(PN 480-227-XX) (X3)Adaptive Fixture*(PN 807-554-00)Registration Tool*(PN 806-303-00)Test HeadFigure 9 Seiko-Epson NS5000/6000 Interface AssemblyNoteParts marked with an asterisk (*) in Figure 9 are used during installation for calibratingthe interface and the prober. They are removed prior to the actual docking.13
Page 1 and 2: Seiko-Epson NS5000/6000Handler Inte
Page 3 and 4: About this ManualSeiko-Epson NS5000
Page 5: NS5000/6000 Handler Interface Insta
Page 9 and 10: NS5000/6000 Handler Interface Manua
Page 11: NS5000/6000 Handler Interface Manua
Page 14 and 15: ..NS5000/6000 Handler Interface Man
Page 27 and 28: Changing from Native to Adaptive Mo
Page 29: NS5000/6000 Handler Interface Manua

573-093-00 : Seiko-Epson NS5000-6000 Handler I-F ... - Zzybot.net

Create successful ePaper yourself

Delete template?

Save as template?