Structured - AMACS Process Tower Internals

LIQUID DISTRIBUTOR TYPE SSOLUTIONS FOR EXTREMELY SMALL SPRINKLING DENSITIESThe patented liquid distributor Type Sis suitable for extremely small sprinklingdensities. The special design enables ahigh density of drip points so that thepacking surface is completely wettedeven with small amounts of liquid.The Channel-style Type Sliquid distributorThe basic design of the Montz channel-type liquid distributorType S is the tried and trusted Montz modular system. Thestandard drain tubes have additional drainage sleeves so thatthe liquid flows from each tube and is split into a number ofsmall individual flows. The design enables drip point densitiesof at least 100 per m 2 for even small amounts of liquid.Channel-style Type Sn liquid distributor for lowest volumetric flows (smallestflows to date around 20 l/m 2 /h)n liquid outlet through drain tubes similar to Type Rn each drain tube has drainage sleeves with lateralslots and seven or more drip fingers at its lowerend to split the liquid flow into correspondingpartial flowsOperating ranges:n 1-stage: approximately 1:3n 2-stage: approximately 1:10(higher ranges upon request)n number of drip points 100 to1,000 per m 2n throughputs 0.02 to approximately70 m 3 /m 2 /hn insensitive to sedimentable dirt particlesSolutions for thetoughest applicationsBecause of the great demands made by liquid distributionon structured packings, Montz has gained a reputation asa specialist in this field. Special designs tailored to evenextreme requirements are standard for us.Special applicationsn non-corrosive materials such as tantalum, zirconium andtitanium are usually standardn liquid distributor Type S to sprinkle tube bundlereactors filled with catalystn distribution of high-viscosity liquids, for example1300 mPasThe Montz Type S liquid distributor with short drip fingersDetailed view ofthe Type S12