Structured - AMACS Process Tower Internals

MONTZ-PAK TYPE B1THE EFFICIENT METAL SHEET PACKINGMontz-Pak Type B1 is the result of many years of experienceand developments in the field of thermal fractionatingtechnology with structured packings. Montz-PakType B1 has proven its reliability in many technicalapplications. The excellent characteristics are assuredby the regular arrangement and the special Montzsurface structure.Characteristicsn high throughputn high flexibilityn high separation efficiency almost up to capacity limitsn low pressure dropn liquid loads from 0.2 to >250 m 3 /m 2 /hn can be adapted to any fractionating task by a variablespecific surfaceApplicationsn vacuum columnsn normal and high-pressure columnsn absorption of components and pollutants from gasand air flowsn natural gas drying with glycolsn refinery columns (atmospheric and under vacuum)n petrochemical columnsn exhaust air washing in aluminum rolling millsn recovery of lube and rolling oiln wastewater treatment with stripping columnsn revamping existing tray or random rings columns toimprove the performance and capacityMaterialsn stainless steels such as : 304, 410S, 316, 316 Ti,316L and 904Ln carbon steeln Hastelloy C4, aluminum, copper, titanium, monel, etc.n other materials are available upon requestColumn Datan column diameter 70mm up to 11m and moren liquid load from 201/m 2 /hn operating pressures from vacuum up to 100 barn minimal liquid hold-upRevampingThe performance and capacity of existing columns such ascrude-oil columns, natural gas dryers, vacuum distillations (forfatty alcohols, fatty acids, methyl ester, etc.) can be increasedby revamping.Angles of inclination of the corrugations:n standard type with 45 on 60 o for particularly high throughputs (suitable to increasethe capacity of existing columns)Separation stagesMore than five theoretical stages per meter are possibledepending on the design.AssemblyThe packings are manufactured as one piece or in segments.Installation can be made through shell flanges or manholes.6