ExtremeWare 7.0 Software Quick Reference ... - Extreme Networks

SLB CommandsCommandconfig nat add vlan map source [any |/]{l4-port [any | {- }]}{destination / {l4-port [any | {- }]}}to [/ | - ][tcp | udp | both] [portmap { - } |auto-constrain]config nat delete [all |vlan map source [any | /]{l4-port [any | {- }]}{destination / {l4-port [any | {- }]}}to [/ | - ][tcp | udp | both] [portmap { - } |auto-constrain]config nat finrst-timeout config nat icmp-timeout config nat syn-timeout config nat tcp-timeout config nat timeout config nat udp-timeout config nat vlan [inside | outside | none]disable natenable natshow nat {timeout | stats | connections | rules {vlan}}DescriptionAdds a NAT translation rule that translates private IPaddresses to public IP addresses on the outsideVLAN.Deletes a NAT translation rule.Configures the timeout for a TCP session that hasbeen torn down or reset.Configures the timeout for an ICMP packet.Configures the timeout for an entry with anunacknowledged TCP SYN state.Configures the timeout for a fully setup TCP SYNsession.Configures the timeout for any IP packet that is notTCP, UDP, or ICMP.Configures the timeout for a UDP session.Configures a VLAN to participate in NAT.Disables network address translation on the switch.Enables network address translation on the switch.Displays NAT settings.SLB CommandsCommandclear slb connections {ipaddress : | vip }DescriptionClears all existing SLB connections.12 ExtremeWare 7.0.0 Software Quick Reference Guide