ExtremeWare 7.0 Software Quick Reference ... - Extreme Networks

IP Unicast CommandsCommandenable multinettingenable subvlan-proxy-arp vlan [ |all]enable udp-echo-serverrtlookup [ | ]run ipfdb-check [index | {}] {extended} {detail}show iparp { | | vlan | permanent}show iparp proxy { {}}show ipconfig {vlan } {detail}show ipfdb { | vlan }show iproute {priority | vlan | permanent| | route-map |origin [direct |static | blackhole | rip | bootp | icmp | ospf-intra |ospf-inter | ospf-as-external | ospf-extern1 |ospf-extern2]} {mpls} {sorted}show ipstats {vlan }show udp-profile {}unconfig icmpunconfig iparpunconfig irdpunconfig udp-profile vlan [ | all]DescriptionEnables IP multinetting on the system.Enables the automatic entry of sub-VLAN informationin the proxy ARP table.Enables UDP echo server support.Performs a look-up in the route table to determinethe best route to reach an IP address or host.Checks IP FDB entries for consistency.Displays the IP Address Resolution Protocol (ARP)table. You can filter the display by IP address, MACaddress, VLAN, or permanent entries.Displays the proxy ARP table.Displays configuration information for one or moreVLANs.Displays the contents of the IP forwarding database(FDB) table. Used for technical support purposes. Ifno option is specified, all IP FDB entries aredisplayed.Displays the contents of the IP routing table or theroute origin priority.Displays IP statistics for the CPU for the switch or fora particular VLAN.Displays the UDP profile information.Resets all ICMP settings to the default values.Resets IP ARP timeout, IP ARP max-entries, and IPARP max-pending-entries to their default values.Resets all router advertisement settings to the defaultvalues.Removes the UDP-forwarding profile configuration forone or all VLANs.38 ExtremeWare 7.0.0 Software Quick Reference Guide