ExtremeWare 7.0 Software Quick Reference ... - Extreme Networks

Commands for Configuring Slots and Ports on a SwitchCommandconfig slot module disable edp ports [ | all]disable flooding ports disable jumbo-frame ports [ | all]disable lbdetect port disable learning ports disable mirroringdisable ports [ | all]disable sharing []disable slot [ | all]disable smartredundancy []enable edp ports [ | all]enable flooding ports enable jumbo-frame ports [ | all]enable lbdetect port [retry-timeout]enable learning ports enable mirroring to port [] [tagged |untagged]enable ports [ | all]enable sharing grouping {dynamic |algorithm {port-based | address-based | round-robin}}enable slot [ | all]enable smartredundancy DescriptionConfigures a slot for a particular I/O module card in amodular switch.Disables the Extreme Discovery Protocol (EDP) onone or more ports.Disables packet flooding on one or more ports.Disables jumbo frame support on a port.Disables the detection of loops between ports.Disables MAC address learning on one or more portsfor security purposes.Disables port-mirroring.Disables one or more ports on the switch.Disables a load-sharing group of ports.Disables one or all slots on a BlackDiamond orAlpine switch, and leaves the blade in a power downstate.Disables the smart redundancy feature.Enables the Extreme Discovery Protocol (EDP) onone or more ports.Enables packet flooding on one or more ports.Enables support on the physical ports that will carryjumbo frames.Enables the system to detect loops between ports. Ifa port is looped, it disables the port. Every Nseconds, it re-enables the port and tries again,unless “none” is specifiedEnables MAC address learning on one or more ports.Dedicates a port on the switch to be the mirror outputport.Enables a port.This command enables the switch to configure staticport load sharing or dynamic port load sharing. Whenconfiguring dynamic port load sharing, LACP will beused to detect and set up for the remote side’s loadsharing capabilities.Enables one or all slots on a BlackDiamond or Alpineswitch.Enables the Smart Redundancy feature on theredundant Gigabit Ethernet port.6 ExtremeWare 7.0.0 Software Quick Reference Guide