ExtremeWare 7.0 Software Quick Reference ... - Extreme Networks

BGP CommandsCommandconfig bgp peer-group maximum-prefix {{threshold } {teardown{holddown-interval }} {send-traps}config bgp peer-group [next-hop-self |no-next-hop-self]config bgp peer-group no-dampeningconfig bgp peer-group [route-reflector-client | no-route-reflector-client]config bgp peer-group [send-community | dont-send-community]config bgp peer-group as-path-filter [in |out] [none | ]config bgp peer-group nlri-filter [in | out][none | ]config bgp peer-group password{encrypted} [none | ]config bgp peer-group remote-AS-number config bgp peer-group route-map-filter[in | out] [none | config bgp peer-group soft-reset {[in |out]}config bgp peer-group source-interface[any | vlan ]config bgp peer-group timer keep-alive hold-time config bgp peer-group weightconfig bgp routerid config bgp soft-reconfigurationconfig ipfdb route-add [clear-all | clear-subnet]create bgp neighbor peer-group {multi-hop}DescriptionConfigures the maximum number of IP prefixesaccepted for all neighbors in the peer group.Configures the next hop address used in the updatesto be the address of the BGP connection originatingthe update.Configures no route flap dampening for a BGP peergroup (disables route flap dampening).Configures all the peers in a peer group to be a routereflector client.Configures whether communities should be sent toneighbors as part of route updates.Configures the AS-path filters for a peer group and allneighbors of the peer group.Configures the NLRI filter for a peer group and all theneighbors of the peer group.Configures the password for a peer group and allneighbors of the peer group.Configures the remote AS number for a peer groupand all the neighbors of the peer group.Configures the route maps for a peer group and allthe neighbors of the peer group.Applies the current input/output routing policy to theneighbors in the peer group.Configures the source interface for a peer group andall the neighbors of the peer group.Configures the keepalive timer and hold timer valuesfor a peer group and all the neighbors of the peergroup.Configures the weight for the peer group and all theneighbors of the peer group.Changes the router identifier.Immediately applies the route map associated withthe network command, aggregation, andredistribution.Specifies which BGP routes are deleted andreinstalled with a new gateway.Creates a new neighbor and makes it part of the peergroup.48 ExtremeWare 7.0.0 Software Quick Reference Guide