11.07.2015 Views

ExtremeWare 7.0 Software Quick Reference ... - Extreme Networks

ExtremeWare 7.0 Software Quick Reference ... - Extreme Networks

ExtremeWare 7.0 Software Quick Reference ... - Extreme Networks

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

IP Unicast CommandsCommanddisable ipforwarding {[broadcast |fast-direct-broadcast | ignore-broadcast]} {vlan }disable ipforwarding lpm-routing {vlan }disable ip-option loose-source-routedisable ip-option record-routedisable ip-option record-timestampdisable ip-option strict-source-routedisable ip-option use-router-alertdisable iproute sharingdisable irdp {vlan }disable loopback-mode vlan [ | all]disable multinettingdisable subvlan-proxy-arp vlan [ |all]disable udp-echo-serverenable bootp vlan [ | all]enable bootprelayenable icmp address-mask {vlan }enable icmp parameter-problem {vlan }enable icmp port-unreachables {vlan }DescriptionDisables routing (or routing of broadcasts) for one orall VLANs. If no argument is provided, disablesrouting for all VLANs.Disables Longest Prefix Match (LPM) routing for thespecified VLAN. If no argument is provided, disablesLPM routing for all VLANs except the managementVLAN.Disables the loose source route IP option.Disables the record route IP option.Disables the record timestamp IP option.Disables the strict source route IP option.Disables the generation of the router alert IP option.Disables load sharing if multiple routes to the samedestination are available. When multiple routes to thesame destination are available, load sharing can beenabled to distribute the traffic to multiple destinationgateways. Only paths with the same lowest cost iswill be shared.Disables the generation of ICMP routeradvertisement messages on one or all VLANs.Disallows a VLAN to be placed in the UP statewithout an external active port. This allows(disallows) the VLANs routing interface to becomeactive.Disables IP multinetting on the system.Disables the automatic entry of sub-VLANinformation in the proxy ARP table.Disables UDP echo server support.Enables the generation and processing of BOOTPpackets on a VLAN to obtain an IP address for theVLAN from a BOOTP server.Enables the BOOTP relay function.Enables the generation of an ICMP address-maskreply on one or all VLANs.Enables the generation of an ICMPparameter-problem message on one or all VLANs.Enables the generation of ICMP port unreachablemessages on one or all VLANs.36 <strong><strong>Extreme</strong>Ware</strong> <strong>7.0</strong>.0 <strong>Software</strong> <strong>Quick</strong> <strong>Reference</strong> Guide

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!