ExtremeWare 7.0 Software Quick Reference ... - Extreme Networks

STP CommandsCommandconfig stpd delete vlan {ports config stpd forwarddelayconfig stpd hellotimeconfig stpd maxageconfig stpd ports cost []config stpd ports mode {dot1d| emistp | pvst-plus} []config stpd ports priority []config stpd priority config stpd tag config vlan add ports stpd [dot1d | emistp | pvst-plus]create stpd delete stpd disable ignore-bpdu vlan disable ignore-stp vlan disable stpd {}DescriptionDeletes one or more ports in the specified VLANfrom an STPD.Specifies the time (in seconds) that the ports in thisSTPD spend in the listening and learning stateswhen the switch is the Root Bridge.Specifies the time delay (in seconds) between thetransmission of Bridge Protocol Data Units (BPDUs)from this STPD when it is the Root Bridge.Specifies the maximum age of a BPDU in thespecified STPD.Specifies the path cost of the port in the specifiedSTPD.Configures the STP mode of operation for thespecified port list.Specifies the port priority of the port in the specifiedSTPD.Specifies the bridge priority of the STPD.Assigns an StpdID to an STPD.Adds a list of ports within a VLAN to a specifiedSTPD.Creates a user-defined STPD.Removes a user-defined STPD from the switch.Allows the switch to recognize STP BDUs.Allows a VLAN to use STP port information.Disables the STP mechanism on a particular STPDor for all STPDs.Disables STP on one or more ports.disable stpd ports []disable stpd rapid-root-failover Disables rapid root failover for STP recovery times.enable ignore-bpdu vlan Configures the switch to ignore the STP BPDUs,which prevents ports in the VLAN from becomingpart of an STPD.enable ignore-stp vlan enable stpd {}enable stpd rapid-root-failoverenable stpd ports Configures the switch to ignore the STP protocol andnot block traffic for the VLAN(s).Enables the STP protocol for one or all STPDs.Enables rapid root failover for faster STP recoverytimes.Enables the STP protocol on one or more ports.30 ExtremeWare 7.0.0 Software Quick Reference Guide