Istruzioni FBR Plus 2009-03 (G19503020) USA ... - JS Woodhouse

REMOVINGRemoving sickle bar mowerThe sickle bar must be set-up on flat and compact ground,supported by the relative supports (A and B, Fig. 15).1. Raise sickle bar.2. Put parking stand (A and B, Fig. 15) in the DOWNposition: install spring locking pin in order to secureparking stand (C, Fig. 15).3. Lower sickle bar to the ground.CAUTION: Before you work around hitch:• STOP engine.• LOCK park brake.• FIRMLY block mower on horizontal surface.CFig. 15AB4. Unhook the PTO schaft (, Fig. 16) from the tractor andput in on the special hook.5. Remove quik-lock pin (D, Fig. 17) and pin (E, Fig. 17)from center link (F, Fig. 17).NOTE: Put quik-lock pins and pins back into bracketson sickle bar for storage.6. Remove draft links (J, Fig. 17) from draft link brackets (G,Fig. 17) by removing quiklock pins (H, Fig. 17) and pins(I, Fig. 17).NOTE: Put quik-lock pins and pins back into bracketson sickle bar for storage.Fig. 167. Drive tractor forward slowly.EDFHGIJFig. 17cod. G19503020m15