Istruzioni FBR Plus 2009-03 (G19503020) USA ... - JS Woodhouse

OPERATING - MECHANICAL LIFTING SYSTEM• Connect one end of the chain (F, Fig. 24) to themower using the supplied pin and the other end toa stationary point on the tractor. Adjust the heightof the mower to the ground (19.6 to 21.7 inches,Fig. 24) by moving the rings of the chain (F, Fig.24) in the hole on the plate (G, Fig. 24).When the lifter is lowered, this precaution willconstantly hold the mower at the same height fromground level. Also, check that the inner skid is stilltouching the ground and adjust the spring (K, Fig.24) if necessary.Fig. 2419.6 ÷ 21.7inchesKGF• Adjusting the hoisting chain (H, Fig. 25) so that during mowingthe hoisting arm (I, Fig. 25) is free to move up and down; in thisway, the cutting arm can follow any unevenness of the ground.So that the mower will work well, we advise you tofix the chain (H Fig. 25) to the lifting arm (I Fig. 25) atthe level of the 7th or 8th link of the chain.H7°/8°IFig. 25• Adjust the heigt of the cutting arm from the ground withchain (J, Fig. 26). Lower the mower; when the external tipof the arm touches the ground, the inner shoe must remainapproximately 10 cm. above ground level (Fig. 26). Adjustby moving the chain links.L1°So that the mower will work well, we advise you to fix thechain (J, Fig. 25-26) to the equalizer (L, Fig. 25-26), leavingthe last links of the chain free.• Adjust inclination of the cutting arm teeth using tie rod (M,Fig. 27).• Adjust the cutting height (Fig. 28) by moving the mowingbar on the holes of the inner mowing bar support (N), and,turning the nut of the outer mowing bar support (M), bringit level with the ground.Fig. 26JFig. 27MNOMin. 1,2 inchesMax. 2,7 inchescod. G19503020mFig. 2819