Istruzioni FBR Plus 2009-03 (G19503020) USA ... - JS Woodhouse

More documents

Recommendations

Info

OPERATING - MECHANICAL LIFTING SYSTEMMowingQ• Remove the supports (P and Q, Fig. 29) and remount them,upside-down in their seat . Install spring locking pin in orderto secure parking stand (R).RPFig. 29• Remove tie rod (S, Fig. 30) from the cutting arm.• The sickle bar is fitted with a safety device for protectionagainst obstacles. If this device is tripped by impact with anobstacle, stop the tractor without raising the cutting arm.Check that the cardan shaft has not become seperated, ifso, reassemble it. Position the safety tie rod parallel tothe ground, and reverse the tractor until the safety tierod hooks up again. If the tie rod releases easly, adjustspring (T, Fig. 31) using nut (U, Fig. 31) which should betightened half turn at a time.For successful mowing and to avoid jamming, we advise youto:• Set and maintain the power take-off at a constant rateof 540 rpm to ensure correct blade frequency;• compatibly with the soil conditions and the type of grass,maintain a steady work speed: no slower than 5 mph to favorthe discharging of the mown grass and no faster than 6.2mph to avoid breaking or damaging the machine's structure.• if the grass is tangled or flattened, keep the cutting bar grazingthe ground.Fig. 30SUT20 cod. G195<strong>03</strong>020mFig. 31
OPERATING - MECHANICAL LIFTING SYSTEMATTENTIONIf the blades becomes jammed, it is advisable to operate carefully wearing suitable personal protection.All the maintenance, adjustments and work preparation operations, must be carried out with the tractor strictlyswitched off and properly stationary, with the ignition key turned off and the sickle bar on the ground.CAUTION• Always raise the implement in order to reverse or change direction.• The cutting arm should not be raised abruptly in order to avoid damaging the cutting blades.• Power take-off must not exceed 540 r.p.m.• Never run the engine at maximum power while mowing.• In order to prevent breakages or damage, the speed of the tractor must never exceed 6.2 mph when theimplement is working.DANGERThe mowing machine has sharp cutting blades. Always make sure that there are no persons, domesticanimals, electrical cables, pipes and so forth, within the field of action of the implement.cod. G195<strong>03</strong>020m21
Page 1 and 2: MASCHIO GASPARDO S.p.A.FBR PlusOPER
Page 3 and 4: TABLE OF CONTENTSDescriptionDescrip
Page 5 and 6: Description of the sickle bar mower
Page 7 and 8: TECHNICAL SPECIFICATIONSLModel Work
Page 9 and 10: MACHINE SAFETY LABELS AND POSITION1
Page 11 and 12: INSTALLING3. Hook the oscillating a
Page 13 and 14: INSTALLINGStability of sickle bar m
Page 15 and 16: REMOVINGRemoving sickle bar mowerTh
Page 17 and 18: 12345671234567OPERATING26)DO NOT we
Page 19: OPERATING - MECHANICAL LIFTING SYST
Page 23 and 24: OPERATING - HYDRAULIC LIFTING SYSTE
Page 29 and 30: OPERATING - QUICK COUPLERQuick Coup
Page 31 and 32: Practice safe maintenanceSERVICE MA
Page 33 and 34: SERVICELubrificationWARNING: • Fi
Page 35 and 36: SERVICEStorageIt is advisable to pr
Page 37 and 38: SERVICEATTENTIONIt is absolutely es
Page 39 and 40: Demolition and disposalDEMOLITION A
Page 41 and 42: ASSEMBLYDimensions and weightBCATYP
Page 43 and 44: ASSEMBLYMechanical liftingHydraulic
Page 45 and 46: ASSEMBLY4.0M12 x 355.06.0cod. G1950
Page 47 and 48: ASSEMBLY9.010.0Do not tighten secur
Page 49 and 50: SPARE PARTSSpare partsOrders must b
Page 51 and 52: SPARE PARTSPos. Cod. DescriptionPos
Page 53 and 54: SPARE PARTSPos. Cod. DescriptionTAV
Page 59 and 60: SPARE PARTSTAV. 50Pos. Cod. Descrip
Page 63 and 64: SPARE PARTSTAV. 70Pos. Cod. Descrip
Page 65 and 66: WARRANTYWARRANTY FOR REPLACEMENT PA
Page 67 and 68: NOTEScod. G19503020m67

Istruzioni FBR Plus 2009-03 (G19503020) USA ... - JS Woodhouse

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?