Istruzioni FBR Plus 2009-03 (G19503020) USA ... - JS Woodhouse

More documents

Recommendations

Info

OPERATING - HYDRAULIC LIFTING SYSTEMUsing the lifting deviceOnce you have positioned the equipment, prepareit for mowing:• release the blade tie rod;• remove the support prop;• remove the blade protection.Fig. 42TSOperation of lifting devicePut the rope (S, Fig. 42) for releasing the bracket(T, Fig. 42) inside the tractor cabin.Climb into the tractor and operate the hydraulicdistributor to lower the blade (Fig. 43) into themowing position.Fig. 43CAUTION: While working regularlycheck that the bracket (T) is stillresting along the cylinder rod (Fig.44).Fig. 44TRaising of the cutter bar for road transport• Fit the guards over the cutters and outer skid (C,Fig. 60).• From the tractor, pull the rope (S, Fig. 45) todisable the bracket (T, Fig. 45) and operate thehydraulic distributor to fully raise the cutter bar.• Sicure it with the hooking tie rod.TSm26 cod. G195<strong>03</strong>020Fig. 45
OPERATING - HYDRAULIC LIFTING SYSTEMMowing on flat ground(or ground with small depressions)ZFig. 46For mowing operations on level ground, couple thelever mechanisms (V and Z, Fig. 46) in position (X,Fig. 46).Lastly insert the lifting device as described in theprevious paragraph.XVWith the rapid lifting device engaged, the bar (U,Fig. 47) has a negative inclination of -15° withrespect to the horizontal plane during mowing, anda positive inclination that varies according to thelie of the land.This system has been devised for mowing quicklyand safely on flat ground or ground with smalldepressions.19.6 ÷ 21.7inchesUFig. 47-15°The operation of the lifting device up to the stop ofthe bracket on the cylinder (T, Fig. 48) allows theequipment to be raised by approx. 12.5 inches fromthe ground and, at the same time, an inclination ofthe blade (U, Fig. 48) of + 25°, so that the end offield maneuvers can be carried out.19.6 ÷ 21.7inchesT12.5inchesFig. 4825°Ucod. G195<strong>03</strong>020m27
Page 1 and 2: MASCHIO GASPARDO S.p.A.FBR PlusOPER
Page 3 and 4: TABLE OF CONTENTSDescriptionDescrip
Page 5 and 6: Description of the sickle bar mower
Page 7 and 8: TECHNICAL SPECIFICATIONSLModel Work
Page 9 and 10: MACHINE SAFETY LABELS AND POSITION1
Page 11 and 12: INSTALLING3. Hook the oscillating a
Page 13 and 14: INSTALLINGStability of sickle bar m
Page 15 and 16: REMOVINGRemoving sickle bar mowerTh
Page 17 and 18: 12345671234567OPERATING26)DO NOT we
Page 19 and 20: OPERATING - MECHANICAL LIFTING SYST
Page 21 and 22: OPERATING - MECHANICAL LIFTING SYST
Page 23 and 24: OPERATING - HYDRAULIC LIFTING SYSTE
Page 25: OPERATING - HYDRAULIC LIFTING SYSTE
Page 29 and 30: OPERATING - QUICK COUPLERQuick Coup
Page 31 and 32: Practice safe maintenanceSERVICE MA
Page 33 and 34: SERVICELubrificationWARNING: • Fi
Page 35 and 36: SERVICEStorageIt is advisable to pr
Page 37 and 38: SERVICEATTENTIONIt is absolutely es
Page 39 and 40: Demolition and disposalDEMOLITION A
Page 41 and 42: ASSEMBLYDimensions and weightBCATYP
Page 43 and 44: ASSEMBLYMechanical liftingHydraulic
Page 45 and 46: ASSEMBLY4.0M12 x 355.06.0cod. G1950
Page 47 and 48: ASSEMBLY9.010.0Do not tighten secur
Page 49 and 50: SPARE PARTSSpare partsOrders must b
Page 51 and 52: SPARE PARTSPos. Cod. DescriptionPos
Page 53 and 54: SPARE PARTSPos. Cod. DescriptionTAV
Page 59 and 60: SPARE PARTSTAV. 50Pos. Cod. Descrip
Page 63 and 64: SPARE PARTSTAV. 70Pos. Cod. Descrip
Page 65 and 66: WARRANTYWARRANTY FOR REPLACEMENT PA
Page 67 and 68: NOTEScod. G19503020m67

Istruzioni FBR Plus 2009-03 (G19503020) USA ... - JS Woodhouse

Create successful ePaper yourself

Delete template?

Save as template?