Istruzioni FBR Plus 2009-03 (G19503020) USA ... - JS Woodhouse

Practice safe maintenanceSERVICE MACHINE SAFETLY• Understand service procedure before doing work. Keep area clean and dry. To avoid ...• Never lubricate, service, or adjust machine while it is moving. Keep safety devices inplace and in working condition. Keep hardware tight.• To prevent from getting caught, keep hands, feet, clothing, jewelry, and long hair away fromany moving parts.• Before servicing machine, lower it to the ground. Disengage all power and stop the vehicleengine. Lock vehicle park brake and remove the key.• Securely support any machine elements that must be raised for maintenance.• Keep all parts in good condition and properly installed. Fix damage immediately. Replaceworn or broken parts. Remove any buildup of grease, oil, or debris.• Unauthorized modifications to the machine may impair its function and safety.Wear appropriate clothing• Wear close fitting clothing and safety equipment appropriate for the job.• Loud noise can cause impairment or loss of hearing, wear a suitable protective devicesuch as earplugs.• Do not wear radio or music headphones while servicing the machine. Safe servicingrequires your full attention.Stay clear of rotating PTO shaftEntanglement in rotating driveline can cause serious injury or death:• Stop the engine and be sure PTO shaft is stopped before getting near it.MaintenanceVarious servicing operations are listed in the following paragraphs. Lower running costs and longer machine lifedepend on constant and methodical compliance with these operations.During work and maintenance operations, use suitable personal protective gear:CAUTION• The given frequencies are indicative and refer to normal conditions of use. They may thereforebe subject to variations in relation to the type of service, a more or less dusty environment,seasonal factors, etc.• In the case of heavy-duty conditions, the maintenance operations should obviously be morefrequent.• Before injecting grease into the lubricators, the greasing points must be thoroughly cleanedto prevent mud, dust or foreign bodies from mixing with the lubricant, thus reducing lubricatingeffect.ATTENTIONIt is absolutely essential to disengage the tractor pto, lower the mowing machine, switch off thetractor, ensure that this is at a complete standstill and remove the key before servicing, adjustingthe implement for work. All assembly operations must be carried out on a work bench.• Always keep oils and greases well away from children’s reach.• Always thoroughly read the warnings and precautions indicated on the containers.• Avoid contact with the skin.• Always thoroughly and fully wash after use.• The utilized oils should be treated in compliance with the current laws in force.cod. G19503020m31