Istruzioni FBR Plus 2009-03 (G19503020) USA ... - JS Woodhouse

OPERATING - QUICK COUPLERQuick CouplerThe Quick Coupler must be used only with hydrauliclifting system.DBD1) Install hitch Quick Coupler (A, Fig. 53) on the tractor (seetractor operator manual).A2) Parking the sickle bar on a flat and compact groundsupported by the relative supports. Then slowly movethe tractor back until the Quick Coupler (A) is in rangewith the point hitches (B and C, Fig. 53).CCFig. 533) Raise the Quick Coupler (A, Fig. 53) and make surethat sickle bar hitch is in the right position (E, Fig. 54).ECAUTION: Before you work around hitch:• STOP engine.• LOCK park brake.• FIRMLY block mower on horizontal surface.Fig. 54Removing sickle bar mower with QuickCoupler1. Raise sickle bar.2. Put parking stand (F and G, Fig. 55) in the DOWN position:install spring locking pin in order to secure parking stand(H , Fig. 55).3. Lower sickle bar to the ground.4. Raise the two Quick Coupler levers (D, Fig. 53) to unlochsickle bar.5. Lower Quick Coupler till further free the sickle bar.FHFig. 55Gcod. G19503020m29