Istruzioni FBR Plus 2009-03 (G19503020) USA ... - JS Woodhouse

SERVICELubrificationWARNING: • Firmly block sickle bar on horizontal surface.• Always keep oils and greases well away from children’s reach.• Always thoroughly read the warnings and precautions indicated on thecontainers. Avoid contact with the skin.• Always thoroughly and fully wash after use. The utilized oils should betreated in compliance with the current anti-pollution laws.Routine maintenance• During the first working hours, check that the screws aretight (Fig. 67).BEvery 8 work hours• Grease points (A and B, Fig. 57).• Grease the cardan shaft and its telescoping parts.• Adjust belt tension periodically by adjusting nut (A, Fig.58). Check tension via the viewing panel on the belt guard.Belt slack must not exceed 1 inch. It is essential to closethe inspection hatch with the relative lid after the belts havebeen examined.AFig. 57Every 50 work hours• Check the tightness of the connecting rod bolts regularly(Fig. 59).Periodically (6 months)• Grease point (A and B, Fig. 57).AAfter each mowing• Clean and oil the mowing bar blades according tothe instructions in the chapter entitled: "Cleaningand oiling the cutters".Fig. 58Lubricants• It is advisable to use SAE 85W/140 OIL or equivalentfor the reduction unit (or gear box) and sidetransmission.• It is advisable to use GR MU EP 2 GREASE orequivalent for all greasing points.cod. G19503020mFig. 5933