Wildwood Log Set - LX-(24,30)WR(S) - White Mountain Hearth

PLACEMENT OF GLOWING EMBERSReplacement glowing embers must be purchased fromEmpire Comfort Systems, Inc. Application of excess glowingembers may adversely affect performance of the heater andmay cause sooting.WARNING: All previously applied glowing embers must beremoved prior to reapplication.Replacement glowing embers Part NumberLX-(24,30)WR(S)-1Platinum Bright EmbersPE-20-1Note: A single layer of glowing embers is to be used whenapplying Platinum Bright Embers (alone or in combinationwith production embers) to the burner.Placement of the glowing embers is very individual and lightcoverage will provide your best effects. We recommendseparation of the glowing embers by hand and make yourcoverage as light and fluffy as possible.Place just enough embers on the burner to obtain the glowand a gold, yellow flame.Do not place glowing embers over large ports in rear portionof burner.Glowing embers should not be placed in the area of the pilotassembly.Replacement glowing embers must be purchased fromEmpire Comfort Systems, Inc. Application of excess glowingembers may adversely affect performance of the heater andmay cause sooting. WARNING: All previously applied loosematerial must be removed prior to reapplication.28680-0-0511 Page 27