Operating Instruction - Precision Balances PS series - MRC

More documents

Recommendations

Info

After choosing basic unit press ENTER/PRINT key. Chosen unit will stoppulsing.Possibilities of choice:• For EC verified balances, user can choose following units: [g], [mg], [ct]• For non-verified balances, user can choose following units: [g], [ct], [mg],[oz], [ozt], [dwt], [t], [mom], [gn].Go back to weighing mode with procedure of saving changes(see point - 7.1.2. – return to weighing).ATTENTION:Balance after switching on will start with set basic unit.8.2. Choice of weighing unit (temporary)Function enables choice of unit with which mass on the pan will be indicated.Unit will be valid until change of unit or switching on and off the balance. Eachpressing the Units key, causes change of measuring unit.Possibilities of choice:• For EC verified balances, user can choose following units: [g], [mg], [ct]• For non-verified balances, user can choose following units: [g], [ct], [mg],[oz], [ozt], [dwt], [t], [mom], [gn].19
8.3. Setting accessibility of balance operating modesIn this group of parameters user declares functions which are to be accessiblefor user after pressing SETUP key.Enter group P6 Func.8.3.1. Choice of modes quantity accessible for userFunction enables user to set if after pressing RIGHT ARROW key alloperating modes will be accessible (ALL) or only one from the list chosenand used by operator, or all functions unavailable (OFF).20
Page 1 and 2: INSTRUCTION MANUAL FORBPS-seriesPre
Page 3: 10.3. “Beep” signal - reaction
Page 6 and 7: InternalcalibrationBPS2100/C/2/CTBP
Page 8 and 9: 2.4. Monitoring the metrological pa
Page 10 and 11: 4.2. UnpackingCarefully remove the
Page 12 and 13: 5. BASIC FUNCTIONS OF THE INSTRUMEN
Page 14 and 15: 7. USER MENUMenu is divided into 7
Page 16 and 17: 7.1. Moving in user menuUser moves
Page 20 and 21: After choosing setting press ENTER/
Page 22 and 23: OFF - inaccessible modeOn - accessi
Page 24 and 25: 9.2. Result confirmationBecause of
Page 26 and 27: 9.4. Light off the last display dig
Page 28 and 29: 10.2. Adjusting brightness of displ
Page 30 and 31: 10.4. Printout of all balance param
Page 32 and 33: - process of calibration can be pos
Page 35 and 36: P1.5 CALt - Time of automatic calib
Page 37 and 38: 11.3.2. Balances with external cali
Page 39 and 40: 11.4.2. External calibrationThe ext
Page 41 and 42: For fields:- user (max 8 alphanumer
Page 43 and 44: Available characters and their equi
Page 45 and 46: 13. BALANCE OPERATING MODES- Weighi
Page 47 and 48: • if you want to choose one them
Page 49: ATTENTION:If user presses ENTER key
Page 53 and 54: From this moment display will not i
Page 55 and 56: 13.4.1. Testing thickness solidsThi
Page 58 and 59: Return to weighing(see - 7.1.2. - r
Page 60 and 61: 14.2. Continuous transmission14.2.1
Page 62 and 63: 14.3. Setting type of operating for
Page 64 and 65: 14.5. Designation of minimum mass f
Page 66 and 67: 15.1. Schedules of connecting condu
Page 68 and 69:
15.4.1. Format of sent data after p
Page 70 and 71:
17. LIST OF ORDERS IN MRC BALANCESF
show all

Operating Instruction - Precision Balances PS series - MRC

Create successful ePaper yourself

Delete template?

Save as template?