Operating Instruction - Precision Balances PS series - MRC

More documents

Recommendations

Info

• P2.1 USrOption enabling to introduce name of user who operates the scale. User haspossibility to introduce the name consisting of max 8 alphanumeric characters.Introduction the name is possible by the means of scale keyboard withNAVIGATION BAR and ENTER key.43
Available characters and their equivalents displayed by scale are shown on thedrawing below:Exemplary user name introduced to scale with capital letters:OP1_WILK (operator 1 WILK)Exemplary user name introduced to scale with small letters:op1_wilk (operator 1 wilk)44
Page 1 and 2: INSTRUCTION MANUAL FORBPS-seriesPre
Page 3: 10.3. “Beep” signal - reaction
Page 6 and 7: InternalcalibrationBPS2100/C/2/CTBP
Page 8 and 9: 2.4. Monitoring the metrological pa
Page 10 and 11: 4.2. UnpackingCarefully remove the
Page 12 and 13: 5. BASIC FUNCTIONS OF THE INSTRUMEN
Page 14 and 15: 7. USER MENUMenu is divided into 7
Page 16 and 17: 7.1. Moving in user menuUser moves
Page 18 and 19: After choosing basic unit press ENT
Page 20 and 21: After choosing setting press ENTER/
Page 22 and 23: OFF - inaccessible modeOn - accessi
Page 24 and 25: 9.2. Result confirmationBecause of
Page 26 and 27: 9.4. Light off the last display dig
Page 28 and 29: 10.2. Adjusting brightness of displ
Page 30 and 31: 10.4. Printout of all balance param
Page 32 and 33: - process of calibration can be pos
Page 35 and 36: P1.5 CALt - Time of automatic calib
Page 37 and 38: 11.3.2. Balances with external cali
Page 39 and 40: 11.4.2. External calibrationThe ext
Page 41: For fields:- user (max 8 alphanumer
Page 45 and 46: 13. BALANCE OPERATING MODES- Weighi
Page 47 and 48: • if you want to choose one them
Page 49: ATTENTION:If user presses ENTER key
Page 53 and 54: From this moment display will not i
Page 55 and 56: 13.4.1. Testing thickness solidsThi
Page 58 and 59: Return to weighing(see - 7.1.2. - r
Page 60 and 61: 14.2. Continuous transmission14.2.1
Page 62 and 63: 14.3. Setting type of operating for
Page 64 and 65: 14.5. Designation of minimum mass f
Page 66 and 67: 15.1. Schedules of connecting condu
Page 68 and 69: 15.4.1. Format of sent data after p
Page 70 and 71: 17. LIST OF ORDERS IN MRC BALANCESF

Operating Instruction - Precision Balances PS series - MRC

Create successful ePaper yourself

Delete template?

Save as template?