Operating Instruction - Precision Balances PS series - MRC

More documents

Recommendations

Info

11.4. Manual calibration11.4.1. Internal calibration• Press F key three times• The balance performs the calibration automatically. During this calibrationdo not load the pan.• After this process the balance records results of the calibration in thememory and returns to weighing mode.ATTENTION:- Pressing the ESC key stops the calibration process- If during the calibration load is on the pan display show order about error.The calibration process is stopped. After take load off the calibrationprocess is finished.39
11.4.2. External calibrationThe external calibration should be performed with external mass class F 2• Start external calibration processbalances with external calibration• Order to load off the pan appears on the display (no load on the pan). Afteryesing load off the pan press the ENTER key.• The balance determines mass of empty pan• Put load and press the ENTER• After the calibration the balance returns to submenu P1.2 uCAL• Return to weighing – as in the point 5.1.2.If balance is verified user does not have the possibility to perform externalcalibration process.11.5. Calibration report printoutAfter calibration user can receive the calibration report. The report can beprinted on connected printer and sent to computer or recorded in file.P1.6 CALr: no – report is not printedP1.6 CALr: YES – report is printedIf the parameter has the value YES, the report is generated and sentautomatically.40
Page 1 and 2: INSTRUCTION MANUAL FORBPS-seriesPre
Page 3: 10.3. “Beep” signal - reaction
Page 6 and 7: InternalcalibrationBPS2100/C/2/CTBP
Page 8 and 9: 2.4. Monitoring the metrological pa
Page 10 and 11: 4.2. UnpackingCarefully remove the
Page 12 and 13: 5. BASIC FUNCTIONS OF THE INSTRUMEN
Page 14 and 15: 7. USER MENUMenu is divided into 7
Page 16 and 17: 7.1. Moving in user menuUser moves
Page 18 and 19: After choosing basic unit press ENT
Page 20 and 21: After choosing setting press ENTER/
Page 22 and 23: OFF - inaccessible modeOn - accessi
Page 24 and 25: 9.2. Result confirmationBecause of
Page 26 and 27: 9.4. Light off the last display dig
Page 28 and 29: 10.2. Adjusting brightness of displ
Page 30 and 31: 10.4. Printout of all balance param
Page 32 and 33: - process of calibration can be pos
Page 35 and 36: P1.5 CALt - Time of automatic calib
Page 37: 11.3.2. Balances with external cali
Page 41 and 42: For fields:- user (max 8 alphanumer
Page 43 and 44: Available characters and their equi
Page 45 and 46: 13. BALANCE OPERATING MODES- Weighi
Page 47 and 48: • if you want to choose one them
Page 49: ATTENTION:If user presses ENTER key
Page 53 and 54: From this moment display will not i
Page 55 and 56: 13.4.1. Testing thickness solidsThi
Page 58 and 59: Return to weighing(see - 7.1.2. - r
Page 60 and 61: 14.2. Continuous transmission14.2.1
Page 62 and 63: 14.3. Setting type of operating for
Page 64 and 65: 14.5. Designation of minimum mass f
Page 66 and 67: 15.1. Schedules of connecting condu
Page 68 and 69: 15.4.1. Format of sent data after p
Page 70 and 71: 17. LIST OF ORDERS IN MRC BALANCESF

Operating Instruction - Precision Balances PS series - MRC

Create successful ePaper yourself

Delete template?

Save as template?