Operating Instruction - Precision Balances PS series - MRC

More documents

Recommendations

Info

11.3. Calibration test11.3.1. <strong>Balances</strong> with internal calibrationInternal calibration mass is compared to its value in the balance memory.This process is automatic. Its result is shown on the display. Processproceeds automatically and display indicates its result (if balance isconnected to computer or to printer through RS 232 joint, printout ofcalibration test will take place). Press ESC/TARA key to return to previousscreen.Procedure:Return to weighingThe changes are recorded when the balance returns to weighingmode with the recording the changes. Press the ESC many times.Following question appears on the display.Select one of the options : ENTER – record / ESC – cancel(Return to weighing 7.1.2. Return to weighing).37
11.3.2. <strong>Balances</strong> with external calibrationIt consists in comparison of mass of standard with mass previously savedin balance memory during the calibration. Process proceeds automaticallyand display indicates its result (if balance is connected to computer or toprinter through RS 232 joint, printout of calibration test will take place).Press ESC/TARA key to return to previous screen.Procedure:Return to weighing(see - 7.1.2. – return to weighing).38
Page 1 and 2: INSTRUCTION MANUAL FORBPS-seriesPre
Page 3: 10.3. “Beep” signal - reaction
Page 6 and 7: InternalcalibrationBPS2100/C/2/CTBP
Page 8 and 9: 2.4. Monitoring the metrological pa
Page 10 and 11: 4.2. UnpackingCarefully remove the
Page 12 and 13: 5. BASIC FUNCTIONS OF THE INSTRUMEN
Page 14 and 15: 7. USER MENUMenu is divided into 7
Page 16 and 17: 7.1. Moving in user menuUser moves
Page 18 and 19: After choosing basic unit press ENT
Page 20 and 21: After choosing setting press ENTER/
Page 22 and 23: OFF - inaccessible modeOn - accessi
Page 24 and 25: 9.2. Result confirmationBecause of
Page 26 and 27: 9.4. Light off the last display dig
Page 28 and 29: 10.2. Adjusting brightness of displ
Page 30 and 31: 10.4. Printout of all balance param
Page 32 and 33: - process of calibration can be pos
Page 35: P1.5 CALt - Time of automatic calib
Page 39 and 40: 11.4.2. External calibrationThe ext
Page 41 and 42: For fields:- user (max 8 alphanumer
Page 43 and 44: Available characters and their equi
Page 45 and 46: 13. BALANCE OPERATING MODES- Weighi
Page 47 and 48: • if you want to choose one them
Page 49: ATTENTION:If user presses ENTER key
Page 53 and 54: From this moment display will not i
Page 55 and 56: 13.4.1. Testing thickness solidsThi
Page 58 and 59: Return to weighing(see - 7.1.2. - r
Page 60 and 61: 14.2. Continuous transmission14.2.1
Page 62 and 63: 14.3. Setting type of operating for
Page 64 and 65: 14.5. Designation of minimum mass f
Page 66 and 67: 15.1. Schedules of connecting condu
Page 68 and 69: 15.4.1. Format of sent data after p
Page 70 and 71: 17. LIST OF ORDERS IN MRC BALANCESF

Operating Instruction - Precision Balances PS series - MRC

Create successful ePaper yourself

Delete template?

Save as template?