FEM 9.832

Page 31FEM 9.832 (08.2001)Table A.1.S: Rack compartment clearance Y4 between the top edge of the support profile andthe bottom edge of the load make-up accessoryFactor of influenceSIR machineAisle equipmentRackinPositioning Coordinates Teach Rack finesystemt-:-c:---r-'::"":"'"_t-:,....:I:..:.n_+-~o:..:::s~.-IStore Height 10 m 20 m 20 m 20 mNo.:nlaT7 2.0 2.0 2.0T16 1.0 1.0 0.0T17 1.0 1.0 1.0V7 1.0 1.0 1.0V8 1.0 1.0 1.0V10 2.0 4.0 2.0T21 1.5 1.5 0.0V12 0.0 0.0 0.0T33 3.0 5.0 0.0Y4 12.5 16.5 7.0Y4 10.0 13.4 6.1Table A.1.6: Rack compartment clearance YS between the top edge of the load make-up accessoryand the bottom edge of the support profileFactor of influenceLoad make-upaccessoSIR machine. Aisle e ui mentRackingPositioning- Coordinates Teach Rack finesystem In os.Store height 10 m 20m 20m 20mNo.:nlaV1 0.0 0.0 0.0T3 2.0 2.0 2.0T7 2.0 2.0 2.0marker T16 1.0 1.0 0.0T13 1.0 1.0 1.0T14 1.0 1.0 1.0T21 1.5 1.5 0·.0T33 3.0 5.0 0.0T34 4.0 4.0 4.0T35 2.0 2.0 2.0V15 3.0 3.0 3.0V17 2.0 4.0 4.0Y5 22.5 26.5 19.0Y5 17.3 20.7 15.4Table A.1.7: Distance Y3 between the top edge of the load make-up accessory and the bottomedge of the supporting profilePositioning- Coordinates Teach Rack finesystem In os.Store height 10 m 20m 20m 20mFactor of influence Si nificance No.: nlaEnt clearance Y2 21.5 25.5 18.0Ent clearance at 70% tolerance Y2 17.5 20.9 15.6Rack com artment clearance Y4 12.5 16.5 7.0Rack com artment clearance at 70% tolerance Y4 10.0 13.4 6.1Rack com artment clearance Y5 22.5 26.5 .19.0Rack com artment clearance at 70% tolerance Y5 17.3 20.7 15.4Minimum distance Y3 56.5 68.5 44.0Minimum distance at 70% tolerance Y3 44.7 54.9 37.1