ST-7000-C SERIES - toshiba tec europe

More documents

Recommendations

Info

1. OUTLINE OF THE SYSTEM EO10-12027(revision Date: Mar. 16, 2007)1.4 Basic Specifications(19) Interface on the RISER PC BoardThe following I/O ports on the RISER PC board are expandable.• POWER LED, HDD LED, POWER SW, RESET SW, BUZZER volume• HDD interface (IDE Interface Primary/Secondary), HDD/CD-ROM power• ATX PS interface• PCI interface• USB interface• 12-24V Step-Up (Boost) DC-DC converter• Printer power connector (24V)• IO board interface• Wake On LAN• PS/2 keyboard (not available)• FAN connector(20) Watchdog Timer FunctionTogether with BIOS and OEM drivers, the Watchdog Timer function is activated, which prevents a hang atthe time of OS start-up. The Watchdog Timer is a circuit for monitoring the microcomputer’s performanceand the system condition and for inquiring the system performance. When detecting some fault condition,an interrupt signal is immediately sent to the CPU and a system restart is performed, resulting in that thesystem returns from the hung state into normal operation.1.4.1.2 POS Functions(1) Drawer interfaceA maximum of two drawers containing the TOSHIBA TEC standard 24V drive circuit can be connected.• 4-pin modular type x 2• 4-pin type x 1(Not used, Japan model only: when the option KIT-7000-PUSB-QM is installed.)Connector specifications4-pin modular typeDrawer Connector Type PC Board RemarksDrive circuit contained on the drawer4-pin modular Engine boardsideDrawer 1Not used, Japan model only4-pin typeIO board4-pinDrive circuit not contained on the(Option)drawer sideDrive circuit contained on the drawerDrawer 2 4-pin modular Engine boardside(2) Serial interfaceCOM1 and COM2COM3 to COM6COM1, COM2: 9-pin DSUB (male) as standardCOM3, COM4: 9-pin DSUB (female) as standard. +5V and +12V can be supplied.COM5, COM6: 9-pin DSUB (female) (option) +5V and +12V can be supplied.COM5 is provided on the I/O PC board, and COM6 is provided on the I/O PC board orthe 10-pin box connector is provided on the RISER PC board. When using COM6, theoption KIT-7000-COM-QM is required.COM3 to COM6 do not have the RI and DCD signals.(3) Powered USB (Installed on the I/O board): optionFour Powered USB ports equipped with 12V/24V power supply can be used. These ports are provided onthe I/O PC board.• Number of ports supported12V P-USB x 3, 24V P-USB x 1 (KIT-7000-PUSB-QM)24V P-USB x 1 (KIT-7000-2COM-QM)1-12
1. OUTLINE OF THE SYSTEM EO10-120271.4 Basic Specifications1.4.2 Operating EnvironmentTemperature Operating: 5 °C to 35 °CStorage: -20 °C to 60 °CTransportation: -20 °C to 60 °CRelative humidity Operating: 10% to 80%RH No condensationStorage: 10% to 90%RH No condensationTransportation: 10% to 90%RH No condensationHeight above sea level Operating: -60 m to 3,000 mNon-operating: -60 m to 12,000 m1.4.3 Power Supply SpecificationsInput voltage/AC 100V to 240V +10%, -10% 50/60 Hz 4.8A to 2.3AConsumption current(with outlet)Output voltage +3.3V ±5%, +5V ±5%, +12V ±5%, -12V ±5%, 5VB ±5%ATX compliance: 20-pin connector, ATX12V, 4-pin connector,HDD connector 4-pin x 2Outlet AC 100V to 240V +10%, -10% 50/60 Hz 2.0A to 1.0AAn outlet supplies the power in conjunction with the engine box’s power on/off.Dimension215 mm (D) x 100 mm (W) x 60 mm (H)Power cordA power cord is not enclosed with the product. Please prepare a power cord locally.To prevent accidents such as electric shocks and malfunctions, connect the ground tothe ground terminal of the outlet.In the United States of America, use the power cord described below:Power cord- UL listed, type SVT, 18/3AWG, rated minimum 125V, 10AAttachment plug- Moulded on type, parallel-blade grounding plug, NEMA5-15P configuration- Moulded on type having standard IEC CE-22 female configurationPower supply capacity The power is shared by the PCI bus, expandable HDDs, USB devices, and otheroption devices in the following range:+24V 2A (Peak 10A)+12V 3A (Peak 8.5A)+5V 3.2A (Peak 9A)NOTES:1. Total consumption current of option devices connected to the POS terminal shouldbe within rated current of each voltage (+24V, +12V, +5V). If it exceeds the ratedcurrent, the POS terminal may malfunction due to shortage of power supply.2. The system should be constructed so that the total power consumption does notexceed the power supply capacity (133W). As the CPU (Celeron 1.2GHz)consumes a maximum of 36W, the power consumption of the option devicesshould be within 97W in total.1-13
Page 2 and 3: EO10-12027TABLE OF CONTENTSPage1. O
Page 4: 1. OUTLINE OF THE SYSTEM EO10-12027
Page 17 and 18: 1. OUTLINE OF THE SYSTEM EO10-12027
Page 20: 2. DETAILED INFORMATION EO10-120272
Page 23 and 24: 3. DETAILED INFORMATION OF EACH PC

ST-7000-C SERIES - toshiba tec europe

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?