ST-7000-C SERIES - toshiba tec europe

1. OUTLINE OF THE SYSTEM EO10-120271.1 Features of the POS Terminal1. OUTLINE OF THE SYSTEMTEC POS terminal has been developed on the basis of the industry standard PC architecture and with theaddition of POS functions, therefore, the POS terminal supports open platform based on the PC architecture.ST-7000-C Series, succeeding the specification of the ST-6500 series and the expandability of the currentlyreleased ST-7000 series, adopts a GHz-class CPU (Intel Celeron 1.2 GHz).1.1 Features of the POS Terminal(1) The Intel Celeron 1.2 GHz CPU is adopted. (It is not possible to upgrade the CPU.)(2) The 128 MB memory (non-ECC type) is installed as standard. Up to 2 GB memory can be installed.(3) Compact design body is adopted in common with the currently released ST-7000 series.(4) The four serial ports (COM1 to COM4), a parallel port, and a USB port are provided as standard. Accordingto the option I/O board kit, the COM ports and the USB ports are expandable.The option I/O board kit is selectable from the following.• KIT-7000-PUSB-QM (Full I/O (one COM port + three 12V P-USB + one 24V P USB) type))• KIT-7000-2COM-QM (one COM + one USB type)(5) Windows ® XP Professional/Embedded, Windows ® 2000, MS-DOS and Linux are supported, however,neither Windows ® 95/98/Me nor Windows ® is supported.(6) Same as the ST-7000 series, maintainability has been improved by adopting module design, which allowseasy disassembly without technical tools.(7) A maximum of the two option HDDs and the option CD-R/RD drive can be installed.NOTES:1. Windows 2000 and Windows XP are registered trademarks of Microsoft Corporation.2. Intel and Celeron are registered trademarks of Intel Corporation.1- 1