Electrolytic CApacitor Product SpecifiCAtion EV TYPE CD SERIES ...

Electrolytic CApacitor Product SpecifiCAtionEV TYPE CD SERIES Page NoContents● Scope P.1● Performance P.1● Leakage Current P.1● Low Temperature Characteristics P.1● Multiplier for Ripple Current P.2● Load Life Test P.2● Shelf Life Test P.2● Solderability Test P.2● Solder Heat Resistance Test P.2● Refiow Soldering Heat Resistance Test P.2● Lead Free Reflow Soldering Condition P.3● Storage Condition P.4● Marking P.4● Catalog Numbering P.5● Dimensions & Appearance P.5● Land/Pad Pattern P.6● Part Number P.7YAGEO ELECTRONIC CORPORATIONEngineering Dept..

Electrolytic CApacitor Product SpecifiCAtionEV TYPE CD SERIES 1I.ScopeThis standard defines characteristics and dimensions for aluminum electrolytic capacitors named EV series forgeneral purpose.II.Performance1.Operating Temperature Range40~105Shipping Temperature-40 ~+702.Capacitance ToleranceCapacitance tolerance should be within the range of 20% which is measured at 120 Hz/20.3.Dissipation Factor (tan)Shown in the attached table at 120 Hz/20.4.Rated DC Working Voltage (WV) and DC Surge Voltage (SV)Rated Voltage(V) Surge Voltage(V) 5.Leakage CurrentThe maximum leakage current is specified in the following formula after DC working voltage applied for 2 minutes.I0.01CV or 3 (A) whichever is greaterwhere I: Leakage Current (A) at 20C: Nominal Capacitance (F)V: Working Voltage (VDC)6.Low Temperature CharacteristicsThe ratio of impedance at -25/20-40/20 and -55/20 of the capacitor shall beYAGEO ELECTRONIC CORPORATIONEngineering Dept..

Electrolytic CApacitor Product SpecifiCAtionEV TYPE CD SERIES 2WVcomparison Z6.3 10 Z(-25) /(Z20 ) 2 2 2 2 2Z(-40) /(Z20 ) 3 3 3 3 3Z(-55) /(Z20 ) 3 3 3 3 37.Multiplier for Ripple CurrentFreq.(Hz) 120 1K 10K 100KCoefficient 0.70 0.80 0.90 1.00Ambient Temperature() Coefficient 8.Load Life TestThe following specifications shall be satisfied when the capacitors are restored to 20 after rated working voltage applied at 1052for 2000 +12 / -0 hours.Capacitance Change Within ±30% of the initial valueDissipation Factor Not more than 200% of the specified valueLeakage Current Not more than the specified value9.Shelf Life TestThe following specifications shall be satisfied when the capacitors are restored to 20 after exposing them at 1052withoutvoltage applied for 1000 +12 / -0 hours.Capacitance Change Within ±30% of the initial valueDissipation Factor Not more than 200% of the specified valueLeakage Current Not more than the specified value10. Solderability TestThe following specifications shall be satisfied when the lead wires are tested in solder bath at 235 11. Solder Heat Resistance TestThe following specifications shall be satisfied when the lead wires are tested in solder bath at 260 12.Refiow Soldering Heat Resistance TestAfter reflow soldering , the following specifications shall be satisfied when the capacitors are restored to 20.Capacitance Change Within ±10% of the initial valueDissipation Factor Not more than the specified valueLeakage Current Not more than the specified value13.Lead Free Reflow Soldering Condition(1)For reflow, use a thermal conduction system such as infrared radiation (IR) or hot blast.Vapor heat transfer systems are not recommended.(2)Observe proper soldering conditions (temperature,time,etc.). Do not exceed the specified limits.(3)Reflow could be performed twice. Please make sure the parts have enough cooling down time betweenthe first and second soldering process.YAGEO ELECTRONIC CORPORATIONEngineering Dept..

Electrolytic CApacitor Product SpecifiCAtionEV TYPE CD SERIES 3Parts upper temperature () -------------------------------------------Peak temperature Peak temperature () Chip capacitor reflow guaranteed condition Time (sec)(4 ~6.3 / 4V~50V)Chip capacitor reflow guaranteed conditionPeak temperature () Time (sec)(4 ~6.3 / 63V~100V, 8 ~10 / 4V~100V)4.Storage Condition(1) Aluminium Electrolytic Capacitors should not be stored in high temperatures or where there is a high levelof humidity. The suitable storage condition is 5~35 and less than 75% in relative humidity.(2) Aluminium Electrolytic Capacitors should not be stored in damp conditions such as water, saltwater sprayor oil spray.(3) Do not store Aluminium Electrolytic Capacitors in an environment full of hazardous gas (hydrogen sulfide ,sulfurous acid gas, nitrous acid, chlorine gas, ammonium, etc…).(4) Aluminium Electrolytic Capacitors should not be stored under exposure to ozone, ultraviolet rays or radiation.(5) If a capacitor has been stored for more than one year under normal temperature (shorter if high temperature)and it shows increased leakage current, then a treatment by voltage application is recommended.YAGEO ELECTRONIC CORPORATIONEngineering Dept..

Electrolytic CApacitor Product SpecifiCAtionEV TYPE CD SERIES 415.Environment-Related SubstancesAll Luxon capacitors comply to RoHS (Restriction of Hazardous Substances) requirements where ChromiumVI (Cr +6 ), Cadmium (Cd), Mercury (Hg), Lead (Pb), Polybrominated biphenyls (PBBs) andPolybrominated biphenyl / diphenyl ethers (PBBEs / PBDEs) have not detected (loewr than MDL(Method Detection Limit)) per SGS certification test report.16.Others(1)Satisfied characteristic JIS C 5101.(2)Aluminum Electrolytic Capacitors may be damaged by corrosion which is caused by anyhalogenated hydrocarbon solvents.Please let us know in advance the solvent name and conditions for your PCB cleaning.III.Marking1.Following items shall be marked on the body of Capacitor.(Note: color of the marking is black)a)Rated Working Voltage6.3V of rated working voltage shall be marked as 6V, but 6.3V shall be assured and 5.5V ofrated working voltage shall be marked as 5V, but 5.5V shall be assured.b)Nominal Capacitancec)Negative polarityd)Series marke)Lot No.2.On the Taping Reela)Rated working voltage, rated capacitanceb)G-luxon electric trademarkc)Part numberd)Packing quantitye)Serial No.f)Manufacturer’s Name(G-luxon Electronics corporation)Catalog numberingG-LUXON EV TYPE (Part Number)C D 006 M 0022 R E B 04 05Standard (other)Case SizeNylon CoatingStandard (spec)SMDVoltageToleranceCapacitanceSeries No.TypeYAGEO ELECTRONIC CORPORATIONEngineering Dept..

Electrolytic CApacitor Product SpecifiCAtionEV TYPE CD SERIES 53.Dimensions and appearance (unit: mm)(-)Negative polaritymarking 不 No marking for thebi-polarRatedVoltage 量Capacitance (µF) 列 SeriesIdentificationDATE CODE150 E511D L A H I W P K4.05.4+0.30.35+0.154.30.2 5.5MAX 1.80.1 0.650.1 1.00.2-0.1-0.205.05.4+0.30.35+0.155.30.2 6.5MAX 2.20.1 0.650.1 1.50.2-0.1-0.206.35.4+0.30.35+0.156.60.2 7.8MAX 2.60.1 0.650.1 1.80.2-0.1-0.206.3 7.70.3 6.60.2 7.8MAX 2.60.1 0.650.1 1.80.20.35+0.15-0.208.0 6.20.3 8.30.2 9.5MAX 3.40.1 0.650.1 2.20.20.35+0.15-0.208.0 10.20.3 8.30.2 10.0MAX 3.40.1 0.900.2 3.10.2 0.700.210.0 10.20.3 10.30.2 12.0MAX 3.50.1 0.900.2 4.60.2 0.700.24.Land/Pad PatternThe circuit board land/pad pattern size for chip capacitors is specified in thefollowing table .[Table of Board Land Size vs. Capacitor Size]Size a b c4.05.4 L 1.0 2.5 1.65.05.4 L 1.5 2.8 1.66.35.4 L and6.37.7 L 1.8 3.2 1.68.06.2 L 2.2 4.0 1.68.010.2 L 3.1 4.0 2.010.010.2 L 4.6 4.1 2.0Among others, when the size a is wide, back fillet can not be made,decreasing fittingstrength. Decide considering mounting condition, solderability and fitting strength, etc.based on the design standards of your company.YAGEO ELECTRONIC CORPORATIONEngineering Dept..

Parts listsElectrolytic CApacitor Product SpecifiCAtionEV TYPE CD SERIES 6SizeCodePart N0R.VV.DCCDp(F)Tangent of LossAngle(tan) MAXRated Ripple CurrentmA r.m.s(120Hz 85)MAXESR()(max)120Hz,20CB CD006M0022REB-0405 6.3 22 3 90 1.93B CD006M0047REB-0405 6.3 47 3 90 1.93C CD006M0047REC-0505 6.3 47 3 160 1.00C CD006M0100REC-0505 6.3 100 6.3 160 1.00D CD006M0100RED-0605 6.3 100 6.3 240 0.52E CD006M0220REE-0806 6.3 220 13.86 300 0.26H CD006M0330REH-0607 6.3 330 20.79 280 0.34E CD006M0330REE-0806 6.3 330 20.79 300 0.26F CD006M0470REF-0810 6.3 470 29.61 600 0.16G CD006M1000REG-1010 6.3 1000 63 600 0.12B CD010M0022REB-0405 10 22 3 90 1.93B CD006M0033REB-0405 10 33 3.3 90 1.93C CD010M0033REC-0505 10 33 3.3 160 1.00D CD010M0100RED-0605 10 100 10 190 0.52H CD010M0150REH-0607 10 150 15 240 0.34H CD010M0220REH-0607 10 220 22 280 0.34E CD010M0220REE-0806 10 220 22 300 0.26F CD010M0330REF-0810 10 330 33 600 0.16F CD010M0470REF-0810 10 470 47 600 0.16G CD010M0680REG-1010 10 680 68 600 0.12B CD016M0022REB-0405 16 22 3.52 90 1.93C CD016M0022REC-0505 16 22 3.52 160 1.00C CD016M0047REC-0505 16 47 7.52 160 1.00D CD016M0047RED-0605 16 47 7.52 240 0.52D CD016M0100RED-0605 16 100 16 240 0.52H CD016M0150REH-0607 16 150 24 280 0.34F CD016M0220REF-0810 16 220 35.2 370 0.22F CD016M0330REF-0810 16 330 52.8 600 0.16G CD016M0470REG-1010 16 470 75.2 600 0.12G CD016M0680REG-1010 16 680 108.8 850 0.08B CD025M0010REB-0405 25 10 3 90 1.93C CD025M0022REC-0505 25 22 5.5 160 1.00C CD025M0033REC-0505 25 33 8.25 160 1.00D CD025M0033RED-0605 25 33 8.25 240 0.52D CD025M0047RED-0605 25 47 11.75 240 0.52YAGEO ELECTRONIC CORPORATIONEngineering Dept..

Parts listsElectrolytic CApacitor Product SpecifiCAtionEV TYPE CD SERIES 7SizeCodePart N0R.VV.DCCAp(F)Tangent of LossAngle(tan) MAXRated Ripple CurrentmA r.m.s(120Hz 85)MAXESR()(max)120Hz,20CD CD025M0068RED-0605 25 68 17 240 0.52H CD025M0100REH-0607 25 100 25 280 0.34E CD025M0100REE-0806 25 100 25 300 0.26F CD025M0150REF-0810 25 150 37.5 600 0.16F CD025M0220REF-0810 25 220 55 600 0.16G CD025M0330REG-1010 25 330 82.5 600 0.16G CD025M0470REG-1010 25 470 117.5 850 0.08B CD035M4R70REB-0405 35 4.7 3 90 1.93B CD035M0010REB-0405 35 10 3.5 90 1.93C CD035M0010REC-0505 35 10 3.5 160 1.00C CD035M0022REC-0505 35 22 7.7 160 1.00D CD035M0033RED-0605 35 33 11.55 240 0.52D CD035M0047RED-0605 35 47 16.45 240 0.52H CD035M0068REH-0607 35 68 23.8 280 0.34H CD035M0100REH-0607 35 100 35 280 0.34F CD035M0100REF-0810 35 100 35 600 0.16F CD035M0150REF-0810 35 150 52.5 600 0.16G CD035M0220REG-1010 35 220 77 600 0.16G CD035M0330REG-1010 35 330 115.5 850 0.08Yageo Corporation3F, 233-1, Pao Chiao Rd.,Hsin Tien, Taipei, TaiwnTel: 886.2.2917.7555Fax: 886.2.2917.3789YAGEO ELECTRONIC CORPORATIONEngineering Dept..