Heizen mit Naturwaerme 02-2011_GB.indd - Viessmann
Heizen mit Naturwaerme 02-2011_GB.indd - Viessmann
Heizen mit Naturwaerme 02-2011_GB.indd - Viessmann
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Heat pumps Vitocal 200-S<br />
3.0 to 10.6 kW<br />
4<br />
1<br />
2<br />
Vitocal 200-S<br />
internal unit<br />
3<br />
1 Expansion vessel<br />
2 3-way diverter valve<br />
3 Heating circuit pump<br />
4 Heat exchanger<br />
5 Vitotronic 200<br />
5<br />
1<br />
Efficient and economical<br />
The Vitocal 200-S operates with astonishing<br />
efficiency, particularly in partial load mode. To<br />
this end, the appliance makes full use of the<br />
benefits offered by a DC inverter. Through<br />
modulation it matches the compressor output<br />
precisely to the prevailing demand and<br />
thereby maintains the required temperature.<br />
When it comes to modernisation, the split<br />
heat pump is ideally suited for efficient dual<br />
mode operation. Under these circumstances,<br />
the existing system remains in operation to<br />
cover peak loads.<br />
Quiet operation through variable<br />
speed control<br />
The modulating operation of the Vitocal 200-S<br />
reduces the frequency of system starting and<br />
stopping. In addition, the variable speed fans<br />
and compressor are significantly less noisy<br />
than those that run at constant operation at<br />
top speed.<br />
Convenient Vitotronic control unit<br />
Contractor and system users benefit equally<br />
from the easy to operate Vitotronic 200<br />
control unit: The control unit, with users<br />
prompts, is structured logically and is easy<br />
to follow. The large backlit display offers<br />
good contrast, making it easy to read. A help<br />
function informs users of the next steps<br />
to perform. The graphic interface will also<br />
display heating and cooling curves. Additional<br />
components from the comprehensive range<br />
2<br />
3<br />
can be easily switched. If required, the<br />
programming unit can be installed hard wired<br />
on a wall mounting base up to five metres<br />
away from the Vitocal 200-S.<br />
Extensive service from <strong>Viessmann</strong><br />
The refrigerant lines are connected to form a<br />
circuit on site. Consequently, the legislature<br />
specifies that the installation is carried<br />
out by qualified personnel only. Heating<br />
contractors can acquire the relevant expertise<br />
in accordance with the Chemical Safety<br />
Ordinance as part of a one week course at<br />
<strong>Viessmann</strong>. Systems can be commissioned by<br />
<strong>Viessmann</strong>'s Technical Service department.<br />
With design software developed by<br />
<strong>Viessmann</strong> in accordance with VDI 4650,<br />
heating contractors can calculate whether<br />
public subsidies are available for the relevant<br />
system wherever required.<br />
<strong>Viessmann</strong> expands its comprehensive<br />
product range<br />
The Vitocal 200-S is a valuable extension<br />
of the comprehensive product range from<br />
<strong>Viessmann</strong>. This offers individual solutions<br />
with efficient systems for any application<br />
and every type of fuel. As opposed to niche<br />
suppliers, <strong>Viessmann</strong> supplies all components<br />
and systems from a single source to the<br />
specialist trade.<br />
Vitocal 200-S<br />
External unit<br />
1 Evaporator<br />
2 Fan<br />
3 Compressor
Change language