Heizen mit Naturwaerme 02-2011_GB.indd - Viessmann

Optimally matched for use with
heat pumps
Viessmann system solutions from a single
source make it easy for you to utilise the
energy from your heat pump to optimum
effect, for example with a suitable DHW
cylinder especially for heat pumps that are
specifically designed for the requirements of
detached and two-family homes when using a
Vitocal 200, 300 or 350.
DHW convenience that's as individual
as you are
The DHW cylinder is prepared for the
connection of a solar thermal system or the
installation of one or two additional electric
booster heaters with up to 6 kW output for
boosting the DHW temperature.
Strong inner values
Viessmann's product range includes the
Vitocell 300 and Vitocell 100 product groups.
All Vitocell 300 cylinders are made of
stainless steel and meet the most stringent
hygiene requirements. It is no coincidence
that stainless steel is also used for its antibacterial
properties in the processing industry,
in kitchens and in hospitals.
Alternatively, the inner surfaces of the
Vitocell 100 are lastingly protected against
corrosion with the proven Ceraprotect enamel
coating. All DHW cylinders are fully equipped
with high-grade insulation against heat loss.
Internal indirect coils, drawn low down to
the cylinder floor, enable quick and energyefficient
heating of the entire cylinder content.
Viessmann DHW cylinder Vitocell 100-V:
perfectly designed for use with heat pumps
Squeaky clean: The Vitocell 300
DHW cylinders are made of
stainless steel – a material
that meets the highest
hygiene standards.
64/65