Panamera

You can read the tire pressures to be
corrected on this display.
The tire pressure to be corrected (refill pressure)
is indicated on the displayed wheel.
Example: If “–1.5 psi (–0.1 bar)" is displayed for
the rear right tire, 1.5 psi (0.1 bar) must be added
to this tire.
The displayed pressures take into account the tire
temperature.
f Only use the pressure specifications from the
“Fill info” display in the tire pressure menu or
from the respective tire pressure warning to
correct the tire pressure.
Note
Each time the ignition is switched on, it make take
approx. 1 minute until all tire pressures are
displayed. Dashes (-.-) appear instead of the tire
pressures.
130 Instrument Panel and Multi-Function Display
Viewing “Tire info” in the Tire pressure menu
1. Select
> “Tire pressure”
2. “Tire info”
and confirm.
The current settings are displayed.
Selecting “Charge” in the Tire pressure menu
1. Select
> “Tire pressure”
2. “Charge”
and confirm.
3. Select load type
and confirm.
Available setting options:
– “Part load”
– “Full load”
f Adapt the pressure of the tires to the selected
load type.
See “Fill info” in the Tire pressure menu.
If this menu is not displayed, the specified tire
pressures are valid for all types of vehicle load.