Panamera

Adjusting brightness of orientation lighting
The brightness of the orientation lighting can be
adapted individually.
1. Select
> “Vehicle”
> “Settings”
> “Light/Visibility”
> “Interior lights”
2. “Amb. light”
and confirm.
3. Adjust to the desired brightness
and confirm.
Setting interior lighting off delay
The off delay for the lighting in the passenger
compartment after closing the vehicle doors can
be adapted individually.
1. Select
> “Vehicle”
> “Settings”
> “Light/Visibility”
> “Interior lights”
2. “Fade-out”
and confirm.
3. Set desired off delay
and confirm.
Setting wiper operation
You have the option of adjusting the activation
mode of the rain sensor and the rear wiper.
1. Select
> “Vehicle”
> “Settings”
> “Light/Visibility”
> “Wiper”
and confirm.
Setting rain sensor activation
Activation of the rain sensor for the windshield
wipers on the windshield in wiper stalk position 1
can be adjusted.
For information on the front wipers:
f Please see the chapter “FRONT WIPER AND
HEADLIGHT WASHER SYSTEM” on page 102.
1. Select
> “Vehicle”
> “Settings”
> “Light/Visibility”
> “Wiper”
2. “Rain sensor”
and confirm.
3. Select desired setting
and confirm.
Available setting options:
– “Automatic”
The rain sensor is activated automatically if the
wiper stalk is in position 1 when the ignition is
switched on.
– “Manual”
The rain sensor remains deactivated if the
wiper stalk is in position 1 when the ignition is
switched on.
Setting activation of the rear wiper when
reverse gear is engaged
You can configure the rear wiper to automatically
perform a series of wipes when it is raining when
reverse gear is engaged.
1. Select
> “Vehicle”
> “Settings”
> “Light/Visibility”
> “Wiper”
2. “Rear wiper”
and confirm.
3. Select desired setting
and confirm.
Instrument Panel and Multi-Function Display 143