16.08.2012 Views

Panamera

Panamera

Panamera

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

No monitoring<br />

In the event of faults, Tire Pressure Monitoring<br />

cannot monitor the tire pressure.<br />

The warning light on the instrument panel lights up<br />

and a corresponding message appears on the<br />

multi-function display.<br />

Monitoring is not active:<br />

– if Tire Pressure Monitoring is faulty,<br />

– if wheel transmitters for Tire Pressure<br />

Monitoring are missing,<br />

– during the learning phase after the tire settings<br />

have been updated,<br />

– after a wheel change without updating the<br />

tire settings,<br />

– if more than four wheel transmitters are<br />

recognized,<br />

– if there is external interference by other<br />

radio sources, e.g. wireless headphones,<br />

– if tire temperatures are too high.<br />

f Please see the chapter “OVERVIEW OF<br />

WARNING MESSAGES” on page 152.<br />

Sport Chrono/Stopwatch<br />

You can use the stopwatch to measure any times,<br />

e.g. on race circuits or on work-related journeys.<br />

Measured lap times can be stored and evaluated<br />

if the vehicle is equipped with Porsche<br />

Communication Management (PCM).<br />

f Please observe the chapter “SPORT DISPLAY”<br />

in the separate PCM operating instructions.<br />

Stopwatch on the dashboard<br />

The stopwatch has an analogue and a digital<br />

display.<br />

The large pointer of the analogue display<br />

measures the seconds. The two small pointers<br />

measure hours and minutes. The display restarts<br />

at zero after 12 hours.<br />

Seconds and increments of 1/10 and 1/100<br />

of a second can be read on the digital display.<br />

The digital display and the display on the on-board<br />

computer can indicate up to 99 hours and<br />

59 minutes.<br />

Stopwatch timing displays<br />

The stopwatch time is displayed at different<br />

positions on the dashboard:<br />

– In the stopwatch on the dashboard.<br />

– In the “Chrono” menu in the multi-function<br />

display on the instrument panel.<br />

– In the “CAR” main menu on the PCM.<br />

Displaying the time on the stopwatch<br />

You can configure the stopwatch on the<br />

dashboard to display the time in the multi-function<br />

display on the instrument panel.<br />

For information on displaying the time on the<br />

stopwatch:<br />

f Please see the chapter “DISPLAYING TIME IN<br />

STOPWATCH ON DASHBOARD” on page 148.<br />

Instrument Panel and Multi-Function Display 135

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!