SensoCard SensoCard Plus - Point of Care Diagnostics

SensoCardSTRIP-CODE SETTINGYour SensoCard meter and SensoCard Test strip form together an accurate measuring system.To assure that the meter and the strips work together properly, the SensoCard meter must becoded to the strips what are used actually. Coding the meter means entering the code valuewhich is assigned individually to each vial of strips. The code is a three-digit alphanumericalnumber affixed to the strips’ vial which influences the accuracy of the meter while it calculatesglucose concentration.There are two ways how you can enter strip-code• by using Code-card (included for every vial of strips), or• by setting the code value manually - which is printed onto the label of the strips’ vial.Important!• Verify that the code displayed on LCD matches the code number on the vial of teststrips each time you use your meter. The code needs to be entered only once for eachvial of test strips. The meter will memorise the code until you change it.• If your Code-card is broken or missing, please follow instructions for”Setting strip-code manually” in this chapter!18