SensoCard SensoCard Plus - Point of Care Diagnostics

More documents

Recommendations

Info

If the strip is in its right place the screen changes: instead of theflashing arrow a flashing blood drop icon appears on the LCD,indicating that the meter is waiting for blood dropping.Note: SensoCard can be switched on by insertingtest strip as well.SensoCard2. Prick your finger and gently squeeze out a small droplet ofblood (0.5μl is enough). Apply the blood droplet to the tip ofthe arrow head shaped end of test strip laterally. Blood shouldfill up the reagent zone completely (see picture in the ”Stripinsertion and use” paragraph of the chapter ”About TestStrip” ). Insufficient amount of blood might result significantinaccuracy or the failure of the test.25
SensoCard3. Flashing blood drop icon disappears from the screen after the blooddroplet reaches the strip. Flashing clock icon shows that the meter isperforming the test. Do not move or touch strip during measuring time.4. On the average measurements take 5 seconds, after the result isdisplayed on the screen.SensoCard Plus not only displays but also tells the result in humanvoice. If Up button is pressed the meter tells you the result again.Meter will display ”Lo” if the measured value is under 1.1 mmol/l(20 mg/dl ) and ”Hi” if the value is above 33.3 mmol/l (600 mg/dl ).5. When the result has appeared, it is possible to mark it with theDown button. If Down button is pressed again, the mark disappears.Marked results will be neglected in case of average glucose levelcalculation of the last 7-14-28 days tests' results. For more informationsee chapter Memory/ Storing data.26Note: Marks can only be added or removed right after the measurement.They cannot be changed when recalling them from memory.
Page 1 and 2: Instructions for UseHuman Voice Dat
Page 3 and 4: SensoCardMEASURING WITH THE METER 2
Page 5 and 6: SensoCardINTRODUCTIONThank you for
Page 7 and 8: SensoCardSENSOCARD METER EXPLAINEDS
Page 9 and 10: SensoCardFOR USERS HAVING PLASMA EQ
Page 11 and 12: SensoCardIMPORTANT PRECAUTIONSAlway
Page 13 and 14: SensoCardPARTS OF SENSOCARD AND SEN
Page 15 and 16: SensoCardSensoCard Test strips are
Page 17 and 18: SensoCardBEFORE STARTING MEASUREMEN
Page 19 and 20: SensoCardSTRIP-CODE SETTINGYour Sen
Page 21 and 22: SensoCard2. Press the Down button o
Page 23 and 24: SensoCardSetting strip-code manuall
Page 25: SensoCardMEASURING WITH THE METERBe
Page 29 and 30: SensoCard28Warning!• High or low
Page 31 and 32: SensoCardRecalling data from memory
Page 33 and 34: SensoCardOVERVIEW OF FUNCTION MENUS
Page 35 and 36: SensoCardWhen time is set press the
Page 37 and 38: SensoCardSELECTING MEASUREMENT UNIT
Page 39 and 40: SensoCardDELETING DATA STORED IN ME
Page 41 and 42: SensoCardBATTERY REPLACEMENTSensoCa
Page 43 and 44: SensoCardImportant!• If the instr
Page 45 and 46: SensoCardChecking with Check-stripP
Page 47 and 48: SensoCardChecking with CareSens con
Page 49 and 50: SensoCardIf the result of self test
Page 51 and 52: SensoCard3. E-O error message• If
Page 53 and 54: SensoCard10. E-9 error message• E
Page 55 and 56: SensoCardMANUFACTURER'S WARRANTY77
Page 57 and 58: SensoCardManufacturer:77 ELEKTRONIK

SensoCard SensoCard Plus - Point of Care Diagnostics

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?