FREE POSTER OFFER INSIDE! - Brownells
FREE POSTER OFFER INSIDE! - Brownells
FREE POSTER OFFER INSIDE! - Brownells
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
AR-15/M16<br />
2<br />
HIGH STANDARD AR-15/M16<br />
HSA-15 FLATTOP UPPER RECEIVER<br />
ASSEMBLY<br />
Ready To Install On Your Choice Of Lower;<br />
Stripped & Completely Assembled Models<br />
COMPLETE FLATTOP UPPER RECEIVER ASSEMBLY - Complete,<br />
fully assembled M4-type upper receiver is ready to install<br />
on your lower of choice. Add a rear sight or scope, and you’re<br />
ready to go shooting. Perfect for converting a rifle to a carbine,<br />
or build a completely new gun customized to your exact requirements.<br />
Manufactured in the U.S. from top-quality materials to<br />
original Colt specs; each part is gauge-checked during assembly<br />
for correct tolerances under MIL-STD 105D. Forged from 7075<br />
T6 aluminum alloy, then hardcoat anodized for added strength<br />
and wear resistance. Includes a standard military contour, 16"<br />
barrel with six-groove, 1-9" twist rifling, plus an A2 gas block/<br />
front sight with bayonet lug and 1¼" wide sling loop. A2-style<br />
flash suppressor has five ports on top and a solid bottom to<br />
prevent dust signature when shooting prone. Flattop accepts<br />
a detachable carry handle, scope, or red dot sight; laser-etched<br />
white index numbers aid in temporary removal and replacement<br />
of sight without loss of zero. M4 handguard is molded from<br />
tough, high-impact polymer that resists moisture, temperature<br />
extremes, and chemicals.<br />
SPECS: Receiver – Forged 7075 T6 aluminum, hardcoat anodized,<br />
matte black. Barrel - 4140 steel, parkerized finish, black. 16” (40cm)<br />
long. .725” O.D. at the muzzle. Handguard – High-impact polymer,<br />
black.<br />
#430-000-528CG HSA-15 Upper Receiver Assembly,<br />
3D543C66 .......................$ 543.66<br />
STRIPPED A2 UPPER RECEIVER - Sturdy,<br />
carry handle configuration of military<br />
M16A2 rifles is the perfect foundation for<br />
a rugged tactical carbine. Precision machined<br />
from a 7075 T6 aluminum forging<br />
to original Colt specs and military tolerances<br />
just like the complete upper sold<br />
above. Later, A2 style includes shell deflector, forward assist<br />
housing, and provisions for mounting A2 rear sight and ejection<br />
port cover (not included).<br />
SPECS: 7075 T6 aluminum, hardcoat anodized, matte black. Fits<br />
mil-spec AR-15 lower receiver with .250” pivot pins.<br />
#430-000-514CG Stripped HSA-15 A2 Upper Receiver,<br />
3D99C63 .........................$ 99.63<br />
SABRE DEFENCE AR-15/M16<br />
TACTICAL CARBINE<br />
UPPER RECEIVER ASSEMBLY<br />
Full-Featured, Reliable, Ready To Run;<br />
High-Strength 7075 Alloy Forging<br />
Complete, M4-style flattop upper receiver comes fully assembled<br />
and ready to serve as the top half of a rugged, finely<br />
tuned tactical carbine that’ll handle the most rigorous operational<br />
requirements. Receiver is forged from 7075 T6 aluminum<br />
for maximum strength and rigidity—nearly twice the tensile<br />
strength of standard 6061 alloy—and includes bolt, carrier, forward<br />
assist, shell deflector, charging handle, ejection port cover,<br />
and MIL-STD 1913 Picatinny rail. Four-rail, free-float handguard<br />
has plenty of ventilation holes to help keep the barrel<br />
cool and a continuous upper rail that aligns with receiver rail to<br />
provide 13" of uninterrupted rail space for maximum flexibility<br />
in mounting a scope or red dot sight. Removable bottom panel<br />
allows installation of M203 grenade launcher, shotgun, or tear<br />
gas launcher. Rail slots have white, laser-etched alpha-numeric<br />
position markers to enable temporary removal and reinstal-<br />
TKS ENGINEERING AR-15<br />
MACHINED UPPER & LOWER<br />
RECEIVERS<br />
Machined From Billet<br />
For Maximum Strength &<br />
Accuracy<br />
Stripped receiver halves<br />
CNC machined from solid<br />
6061 T6 aluminum billet to<br />
produce an AR-15 upper and<br />
lower of outstanding strength<br />
and stability. Extra metal<br />
adds rigidity, making these components the perfect platform for<br />
a hard-running tactical rifle or a heavy duty, match-grade gun.<br />
All holes, inletting, and pin locations have been machined to<br />
final dimensions. Add the bolt, carrier, fire-control system, and<br />
internal components of your choice to build the perfect custom<br />
rifle for your application. Flattop Upper includes case deflector<br />
and opening for forward assist, plus MIL-STD 1913 Pictainny<br />
accessory rail. Lower has integral triggerguard milled from the<br />
billet with the rest of the receiver to provide extra support between<br />
the pistol grip area and the magwell. “Safe” and “Fire”<br />
markings at selector switch hole.<br />
SPECS: 6061 T6 aluminum, hardcoat anodized, matte black finish.<br />
Small-pin, .154” (3.9mm) hammer/trigger pin holes. .250” (6.3mm)<br />
pivot/takedown holes.<br />
#100-003-658CG Machined AR-15 Upper Receiver,<br />
9B152P03 .......................$ 152.03<br />
#100-003-659CG Machined AR-15 Lower Receiver,<br />
2F190P97 ........................190.97<br />
DPMS AR-15<br />
FORGED LOWER RECEIVER<br />
Forged Construction<br />
Adds Toughness To The Rifle<br />
You’re Building<br />
7075-T6, aircraft-grade aluminum<br />
receiver is forged and tempered<br />
for strength, just like the M16 lowers<br />
used by the U.S. military. CNC<br />
machined and ready to be the foundation for your match, tactical<br />
or hunting rifle. Hard coat anodized to mil-spec 8625 for durability;<br />
Teflon ® coating gives additional lubricity and an attractive,<br />
matte, black finish.<br />
SPECS: 7075-T6 aluminum, Teflon, black, matte finish. 8.6 oz. (244<br />
g.) wt. FFL required.<br />
#231-000-113CG Forged Lower Rec'r 1C132Y99 ...$ 132.99<br />
AsK ABOUT<br />
OVERNIgHT DELIVERy!<br />
lation of sights without loss of zero. Yankee Hill flip-up front<br />
and rear sights are designed to co-witness through many nonmagnifying<br />
optics. Windage-adjustable rear sight has A2-style<br />
long- and short-range apertures; front sight on the low-profile<br />
gas block has A2 post, bayonet lug, and sling swivel. M4-contour,<br />
16" barrel of long-wearing chrome-moly-vanadium steel alloy is<br />
chrome lined for maximum bore life and chambered in 5.56mm<br />
NATO. “Shark gill” flash hider/muzzle brake virtually eliminates<br />
muzzle rise for fast follow-up shots; recessed target crown<br />
protects the rifling.<br />
SPECS: Receiver – 7075 T6 aluminum alloy, hardcoat anodized,<br />
matte black finish. Fits mil-spec AR-15/M16 lower receiver with<br />
.250” pivot pins. Barrel – Chrome-moly-vanadium steel alloy, matte<br />
black finish. Chrome lined. 16” (40.6cm) long. 1-7” twist. Chambered<br />
for 5.56mm NATO. Handguard – 6061 T6 aluminum, hardcoat<br />
anodized, matte black. Sights – Steel, Parkerized, matte black.<br />
#100-003-952CG Tactical Carbine Upper Receiver,<br />
5D1143T45 ....................$ 1,143.45<br />
CMMG AR-15<br />
MOD4SA LOWER RECEIVER<br />
Stripped Or Fully Assembled<br />
With Precision Trigger Group<br />
Rugged, semi-auto receiver<br />
made from a high-quality<br />
forging is built to handle the<br />
hard use and reliability requirements<br />
of tactical and<br />
competitive shooting. Forged<br />
from 7075 T6 aluminum alloy<br />
for maximum strength and rigidity<br />
before final machining to mil-spec dimensions. Hardcoat<br />
anodized for added strength, then Teflon ® -coated for outstanding<br />
resistance to surface abrasion or discoloration from solvents<br />
and lubes. Stripped lower includes receiver only without any<br />
additional parts for full, custom build projects. Complete is fully<br />
assembled with all receiver components and is available with<br />
single, left side-mounted safety selector or ambidextrous safety<br />
selector; does not include buttstock or related parts. Includes<br />
polymer A2 pistol grip, trigger group, bolt release lever, mag release<br />
button, and aluminum triggerguard. CMMG’s engineers<br />
designed custom fixtures for final grinding of ten separate contact<br />
surfaces on the trigger, disconnector, and hammer to ensure<br />
a trigger pull that's far superior to many factory triggers. Proprietary<br />
bronze bushings on trigger and hammer pins reduce<br />
friction for a consistent, ultra-smooth pull and exceptionally fast<br />
locktime. Rounded, low-mass hammer further speeds locktime<br />
and reduces wear on contact surfaces. Trigger is function tested<br />
before lower leaves the factory; compatible with .22 LR conversions.<br />
SPECS: Forged 7075 T6 aluminum, hardcoat anodized, Teflon coated,<br />
matte black. ".223/5.56mm" stamped on side of magwell. .154”<br />
hammer/trigger pin holes. .250” pivot pin holes. FFL required for<br />
purchase.<br />
100-004-243CG Complete Receiver, Single Safety,<br />
3B00PUA .......................$ 339.99<br />
#100-004-098CG Complete Receiver, Ambi Safety,<br />
3B00ZAY. . . . . . . . . . . . . . . . . . . . . . . . . 359.99<br />
#100-004-106CG Stripped Receiver, only 3B139P99 . 139.99<br />
DOUBLE STAR AR-15 LOWER RECEIVERS<br />
Mil-Spec Lowers<br />
Ready For Your Next<br />
AR-15 Project<br />
High strength, hammer<br />
forged receiver is<br />
CNC machined and<br />
hardcoat anodized<br />
black. Extra reinforcement around the front pivot pin, reinforcing<br />
ridge over the buffer tube area, and a full fence around the<br />
magazine catch button ensure it's built for rugged use. Safe and<br />
Fire are engraved on both sides for guns with ambi safeties.<br />
Complete receivers include triggerguard, magazine catch button,<br />
mil-spec trigger group and pistol grip. Available complete<br />
and fully assembled with M4 or A2 stock configuration, complete<br />
without buttstock, and as a stripped receiver only. Made in USA<br />
with mil-spec parts only.<br />
SPECS: 7075-T6 forged aluminum, CNC machined to Mil-Spec.<br />
Hard coat anodized, Teflon coating, matte black.<br />
#100-002-315CG M4 Lower, Complete 9Z234P00 ....$ 234.00<br />
#100-002-314CG A2 Lower, Complete 9Z235P00 .....235.00<br />
#100-002-313CG Lower, Complete w/o Stock,<br />
9Z180P00 ........................180.00<br />
#100-002-312CG Lower, Stripped 9Z113P84 ......... 113.84<br />
MIL/LE sUppLy gROUp Order/Quotes: 1-800-741-0308<br />
Model<br />
Shop<br />
ar-15 receiver<br />
brownells.com<br />
Search<br />
HIGH STANDARD<br />
HSA-15 CARBINE<br />
LOWER RECEIVER<br />
Extra Strong, Mil-Spec<br />
Receiver With Custom-Quality<br />
Trigger Group<br />
Complete, semi-auto M4-type lower receiver with trigger<br />
group A2 pistol grips and collapsible stock is ready to accept the<br />
upper that meets your exact needs. A supplier to the U.S. military<br />
since WWII, High Standard’s name means top-quality materials<br />
and workmanship throughout. All parts are manufactured in<br />
the U.S. to original Colt specs, and each part is gauge-checked<br />
for correct tolerances in accordance with MIL-STD 105D during<br />
assembly. Receiver is forged from 7075 T6 aluminum alloy, which<br />
has nearly twice the tensile strength of the standard 6061 alloy,<br />
then hardcoat anodized for even greater strength. The steel<br />
trigger/hammer group’s precision-ground engagement surfaces<br />
provide a crisp, near-match-grade trigger pull. M4-style, 6-position<br />
collapsible buttstock includes buffer tube, buffer, recoil<br />
sring, receiver lock plate, lock nut, and rear sling swivel. Lower<br />
Receiver w/o Buttstock includes lower receiver assembly with<br />
trigger group and pistol grip fully assembled for those who wish<br />
to install their own buttstock. ab<br />
SPECS: Receiver – Forged 7075 T6 aluminum, hardcoat anodized,<br />
matte black. Buttstock/Pistol Grip – High-impact polymer, black. FFL<br />
required for purchase.<br />
#100-002-328CG HSA-15 Lower Receiver, w/Buttstock,<br />
3D265U77. . . . . . . . . . . . . . . . . . . . . . .$ 265.77<br />
#100-003-220CG HSA-15 Lower Receiver, w/o Buttstock,<br />
3D193Z24 ........................193.24<br />
PATRIOT ORDNANCE FACTORY<br />
AR-15/AR-STYLE .308<br />
MACHINED LOWER RECEIVER<br />
For Precise Dimensions<br />
& Superb Strength<br />
Stripped, semi-auto lower<br />
receiver is machined from 7075<br />
T6 aluminum billet for superb<br />
strength and precise dimensions. Extra metal in the right places<br />
gives a big payoff in added support and rigidity with minimal extra<br />
weight. Available in AR-15 and AR-style .308 sizes, both models<br />
accept mil-spec and aftermarket, so you can select the upper,<br />
trigger group, pistol grip, receiver extension, and buttstock that<br />
best serve your needs—the perfect foundation for a custom tactical<br />
rifle. Integral, oversized triggerguard machined as part of<br />
the receiver further enhances structural rigidity and provides<br />
plenty of clearance for trigger finger when wearing gloves. Radiused<br />
inside and outside edges protect finger from cuts and<br />
scrapes when mounting weapon quickly or during extended fire.<br />
Flared magwell with smoothly radiused inside corners helps ensure<br />
fast reloads, without fumbling, when seconds count. Cut for<br />
ambidextrous bolt release to allow strong- or weak-hand operation;<br />
right-side button included with receiver. Easy-to-see laser<br />
etched, international “fire” and “safe” symbols give the operator<br />
instant, intuitive feedback on the weapon’s safety status in highstress<br />
situations. Mil-spec hardcoat anodized for additional<br />
surface strength and corrosion resistance before application of<br />
the hard, self-lubricating Teflon ® outer coating that’s almost impervious<br />
to abrasion and scratches. All heat-treatment, plating,<br />
coatings applied by U.S.-owned and operated contractors.<br />
SPECS: 7075 T6 aluminum, hardcoat anodized. Small-pin, .154”<br />
(3.9mm) hammer/trigger pin holes. .250” (6.3mm) pivot/takedown<br />
holes. P-415 - Accepts mil-spec AR-15/M16 rifle or carbine upper receiver<br />
and internal components. Matte black finish. P-308 - Accepts<br />
AR-style .308/7.62mm upper receivers from Patriot Ordnance,<br />
DPMS, and Remington Arms. Uses standard small-pin AR-15 trigger,<br />
pistol grip, takedown pin, and receiver extension. Requires<br />
.308 buffer, buffer spring, pivot pin. Matte medium gray finish. FFL<br />
required for purchase.<br />
#100-004-193CG P-415 AR-15 Lower Receiver,<br />
1G322D15 .......................$ 322.15<br />
#100-004-349CG P-308 AR-Style .308 Lower Rec'r<br />
1G412H16 .......................412.16