FREE POSTER OFFER INSIDE! - Brownells

cleaning
62
DEWEY
MIL/LE PISTOL CLEANING KIT
Essential Cleaning Gear
For Service Pistol Calibers
Caliber-specific kits for
basic cleaning of service
pistols in calibers commonly
deployed with military and
law enforcement agencies.
Available for 9mm/.357/.38
and .40, each kit includes 6" brass cleaning rod, brass loop, and
bronze bore brush to protect your weapon’s rifling; a ½ oz. bottle
of Shooter’s Choice FP-10 for thorough cleaning and lubrication;
a GB-5 double-ended military parts brush; and a siliconeimpregnated
wipe-down cloth. Compact, zippered vinyl storage
pouch stows easily in a pack or vehicle. ab
SPECS: Kits available for 9mm/.357/.38 and .40 caliber pistols
and revolvers. Includes 6” (15.2cm) long cleaning rod with 8-32
tpi female threads, brass loop, bronze bore brush, ½ oz. (14.8ml)
Shooter’s Choice FP-10 cleaner, double-ended nylon parts brush,
cotton flannel patches, silicone-impregnated wipe-down cloth, and
zippered 5” (12.7cm) x 10½” (26.7cm) storage pouch.
#234-000-072CG 9mm/.357/.38 Pistol Kit 4C15V95 . .$ 15.95
#234-000-073CG .40 Pistol Kit 4C15V95 .............15.95
OTIS
LAW ENFORCEMENT
CLEANING SYSTEMS
Pocket-Size Kits To Clean
All Your Duty Weapons
Everything you need
to thoroughly clean duty
weapons in a handy, pocketsized
case that zips open to
reveal an incredible array of
cleaning tools and supplies.
Non-scratch, plastic-coated,
Memory Flex cleaning cables
with interchangeable
handle roll up for storage
and allow correct breachto-muzzle
cleaning without
disassembling the weapon. Universal-caliber, woven-cotton
patches thoroughly strip crud and gunk from bores and can be
repositioned on slotted tips to present fresh cleaning surfaces
for six separate passes. Kits include heavy-duty brass slotted
tips, bronze bore brushes, Otis O85 Ultra Bore all-in-one cleaner/
lubricant/protectant, multi-purpose cleaning brush, fiber optic
bore reflector/safety flag. An array of picks, scrapers, and smallparts
cleaning tools complete these multi-weapon, all-in-one
cleaning systems. Each component fits into its own slot in the
zippered, soft-side nylon carrying case with exterior loop for
attachment to belts up to 2½" wide. Deluxe Law Enforcement
Cleaning System is designed to clean 9mm to .45 caliber pistols,
5.56 and 7.62 caliber rifles, and 12 gauge shotguns. Professional
Pistol Cleaning System will clean 9mm to .45 caliber duty pistols
and submachine guns. ab
SPECS: Nylon carrying case, black. Deluxe Law Enforcement
Cleaning System contains six (6) brass brushes; four (4) brass
slotted tips; interchangeable brass handle; ½ oz. (1.4ml) tube
O85 cleaning solvent/lubricant; ten (10) cotton patches, two (2),
8” (20.3cm) and one (1), 30” (76.2cm) plastic-coated, steel cable
rods; obstruction remover; bore reflector/safety flag; three (3) rod
adapters; scraper; pick; nylon multi-purpose brush. Professional
Pistol Cleaning System contains two (2) brass brushes; brass
patch loop; interchangeable brass handle; ½ oz. tube O85 cleaning
solvent/lubricant; ten (10) cotton patches; 8”, 12” (30.5cm), and 20”
(50.8cm) plastic-coated, steel cable rods; pin punch; brass scraper;
straight pick; angled pick; nylon multi-purpose brush; fiber optic
bore reflector/safety flag; and NATO rod adapter.
#668-000-015CG Deluxe LE Cleaning System,
8F43A45 . . . . . . . . . . . . . . . . . . . . . . . . .$ 43.45
#668-100-001CG Professional Pistol Cleaning System,
8F36U93 ..........................36.93
OTIS SNIPER RIFLE CLEANING KIT
Compact,
Military-Issue
Cleaning System
For .308/7.62mm
Sniper Rifle &
Other Weapons
Compact, easyto-carry,
military
issue cleaning kit
contains all the components
needed to thoroughly
clean the .308/7.62mm
DMR-M14, as well as many
other .30 caliber weapons, including
M24, M40, M240, M1, and AK-47, in a compact, lightweight,
easy-to-carry package. The kit’s 8 oz. of gear fit into the zippered
MOLLE-compatible case and replace over 3 lbs. of conventional
cleaning gear. Helps you maintain weapon in top operating
condition no matter where you’re deployed. Flexible, 30" long
cleaning cable allows thorough breech-to-muzzle cleaning, and
the 8" cable is more manageable for cleaning the receiver. Both
coil up neatly for storage in the case. Kit includes bronze bristle
bore brush and chamber brush, slotted tip for patches, and a tube
of mil-spec CLP for cleaning, lubricating, and deep-penetrating
protection from corrosion. Scraper and two picks for cleaning
bolt face and locking lug recesses, plus a lens brush for optics,
all-purpose utility brush and complete instructions. All brass
components have a matte black finish to minimize reflectivity.
MOLLE-compatible case of tight-weave, waterproof Dark
Earth nylon can also be clipped to a belt. NSN #1005-01-451-
5119. ab
SPECS: Kit contains .30 cal. bronze bore brush, chamber brush,
slotted tip, ½ oz. (14.2g) mil-spec CLP cleaner/lubricant/protectant,
10 cleaning patches, 30” flexible cable, 8” flexible cable, T-handle
bar, obstruction remover/T-handle base, NATO adapter, nylon end
brush, retractable lens brush, nylon multi-purpose brush, scraper,
straight and angled locking lug picks, fiber/optic bore reflector/safety
flag, and MOLLE-compatible carrying case of Dark Earth nylon
#668-000-027CG .308/7.62mm Sniper Rifle Cleaning Kit,
8F74A81 .........................$ 74.81
OTIS
COMPACT GUN CLEANING SYSTEM
Everything you
need to maintain
your firearm in one
compact kit. All kits
include rod, solvent,
slotted tip, patches,
bore brushes and
other accessories.
Carries on your belt.
#110 Kit for .17 thru
.22 caliber, rimfire
pistols and rifles.
#211 Kit for rifles
Fully Contained
Pocket Cleaning
Pack
and pistols, .17 thru .45 caliber. #224 Kit for the AR-15, fits recess
in M16A2 buttstock. #308 Sniper Kit is for .30 caliber rifles. Also
contains lens cleaning solution, lens brushes, swabs and cloth.
#750 Tactical Kit for all calibers of rifles, pistols and shotguns,
.17 caliber to 10 gauge. ab
SPECS: Black nylon carrying case, brass brushes, tips and handles.
Cleaning solvent and patches. Plastic coated steel cable rods. Kit
#110 includes 34" and 16" plastic coated cable rods, two bottles of
solvent and short, 1 1 ⁄4" (3.1cm) long brushes. Kit #’s 211, 308, and
750, case is 3.5" (8.9cm) diameter.
#668-000-006CG #110 Cleaning System 8F29P01 . . .$ 29.01
#668-100-211CG #211 Cleaning System,
8F38U95 . . . . . . . . . . . . . . . . . . . . . . . . . .38.95
#668-100-224CG #224 Cleaning System,
8F35U80 . . . . . . . . . . . . . . . . . . . . . . . . . .35.80
#668-000-001CG #308 Cleaning System,
8F58P70 . . . . . . . . . . . . . . . . . . . . . . . . . .58.70
#668-100-750CG #750 Cleaning System,
8F35U65 . . . . . . . . . . . . . . . . . . . . . . . . . .35.65
Brownells
NEEDLE OILER BOTTLES
Leakproof, Solvent & Stain Resistant;
Controlled, Metered Flow
Provides a consistent, small drop of your favorite
lubricating oil, cleaner, bore solvent, stock stain or
finish. Hollow steel “needle” accurately puts that
drop of oil or solvent right where you need it most.
Helps prevent over-lubrication, contamination and
waste. Made from high density polyethylene plastic;
fluorinated to resist breakdown from all common petroleum
based solvents and protect any outer label
from migration damage. Threaded aluminum top
features a heavy-duty, inner, rubber seal and removable
slip cap; both seal tightly and prevent leaks. ab
SPECS: Holds approximately 1 ⁄2 fl. oz. (15 ml) . Sold in 3 paks.
#084-038-203CG Three ½ oz. Needle Oilers,
4H05P46 ..........................$ 5.46
1 OZ. NEEDLE OILER BOTTLES - Polyethylene bottle with hollow,
steel tube places just the right amount of lubricant, cleaner or
other liquid exactly where you want it. Resists breakdown from
most petroleum based oils and common gun solvents. Threaded
plastic top prevents leakage; rubber cap seals tip.
SPECS: Holds approximately or 1 fl. oz. (30ml). Sold in 3 paks.
#084-000-127CG Three 1 oz. Needle Oilers,
6A09U24 ..........................$ 9.24
GUN/PARTS
CLEANING BRUSH
Meets Mil Std. 129J
The Famous Mil-Std. M16 Brush Cleans Everything
Developed for the Armed Forces to clean M16’s. Super-tough,
solvent-proof, polypropylene handle with extra-strong, nylon
bristles gets down into actions; scrubs parts; cleans hard-toget-at
places in shop machinery. Dual-head design has special,
notched “toothbrush” bristles on big end, single row of short
bristles on small end. Enough bristle backbone to remove greasy
gun dirt, yet won’t scratch bluing. We have used these brushes
in d’Solve , WD-40, Hoppes, Shooters Choice and every other
oil and solvent around here to clean everything from a fine custom
rifle to a black powder junker. It’s an exceptionally good,
practical, cleaning brush for use on your bench or in your field
kit. ab
SPECS: 7" (17.8cm) overall. Meets Mil Standard 129J.
#676-450-001CG Gun/Parts Brush 8K01Z19 . . . . . . . . .$ 1.19
#676-450-006CG Gun/Parts Brush, 10-pak,
8K10Z97 . . . . . . . . . . . . . . . . . . . . . . . . . .10.97
AR-15 GRIP KIT - Provides a very useful,
field and emergency cleaning kit
that’s always ready for use. All components
are contained in a secure,
grip insert that stores in the standard
handgrip recess.
SPECS: Polymer insert, black. Contains:
cleaning patches, 26" (66cm) flexible rod,
bore brush, slotted, brass tip, NATO thread adapter and T-handle.
#668-000-005CG AR-15 Grip Kit 8F38P98 . . . . . . . . . .$ 38.98
CLEANING PATCHES - The same patches used
in the compact cleaning system. Pre-slotted to
fit loop-style rod tip. Each patch can be varied in
size by pinching at the various slots. Small Caliber: 100 patches
for .22-.30 caliber. All Caliber: 100 patches for .17 caliber to 10
gauge. Panaply: 50 patches to fit .35-.50 caliber. Twice as thick
as All Caliber patches for aggressive bore scrubbing.
SPECS: 100% virgin cotton. Diameter: Small Caliber - 2" (5cm),
All Caliber - 3" (7.6cm), Panaply - 3" (7.6cm).
#668-000-002CG Small Caliber Patches 8F04P25 . . . .$ 4.25
#668-000-003CG All Caliber Patches 8F05P15 . . . . . . . .5.15
#668-000-004CG Panaply Patches 8F04P25 . . . . . . . . . .4.25
mil/le supply group Order/Quotes: 1-800-741-0308
Br o w n e l l s HEAVY-DUTY
GUNSMITH BRUSHES
Stainless Steel,
Brass Or Nylon Bristles
Stitched-In
Wood Handle
Our finest, small cleaning
brushes. Stainless
steel stitching laced all
the way through the handle keeps the bristles in place and prevents
pull-out under even the heaviest use. Made for the aircraft
industry to exceed mil specs so you know they’ll last in the gun
shop too. Handle is 7-ply, no split laminate that stands up to
all solvents and hard scrubbing. Available in three bristle materials
to suit any job. Stainless Steel (C) - Crimped wire that
holds its shape well. Fantastic for parts washing and also an
excellent choice for removing welding scale in tight corners (like
bolt knob jobs!). Stainless Steel (S) - Straight wire that gives a
slightly softer scrubbing action but still holds its shape even with
repeated use. Excellent for scrubbing and degreasing parts in
solvent prior to polishing and refinishing. Brass - Straight wire
for a more gentle action that still gets through built-up grease,
oils and fouling. Nylon - Tough, black nylon provides no- scratch
cleaning of surfaces and recesses.
SPECS: All four have: .005" (.127mm) diameter bristles; 3 rows of
7 ⁄16" (11.1mm) long bristles set 3 ⁄8" (9.6mm) wide, 1 3 ⁄8" (3.5cm) long.
7 3 ⁄4" (19.7cm) long overall.
STOCK # EA. PRICE STK # 6 PAK PRICE BRISTLES
353-013-000CG $ 3.99 353-013-006CG $ 15.99 Nylon
353-014-000CG $ 4.99 353-014-006CG $ 23.99 Brass
353-015-000CG $ 4.99 353-015-006CG $ 19.99 Stainless (C)
353-016-000CG $ 5.99 353-016-006CG $ 22.99 Stainless (S)
COTTON-TIPPED APPLICATORS
Gets Down In The Nooks & Crannies
We first spotted cotton-tipped applicators in pro use when
touring the beautiful gunsmith shop at the FBI Academy in
Quantico, VA. Beside each vise was a handful of them where one
could be quickly grabbed for a host of uses - lubrication, cleaning
down inside actions, getting into barrel chambers and for touchup
bluing of spots on barrels, frames and sights. ab
SPECS: 6" (15.2cm) long. Wood handle.
#885-861-500CG 500 Applicators 1A05T99 ..........$ 5.99
#885-861-600CG 1000 Applicators 5H10T36 .........10.36
SUPER-DUTY
PIPE CLEANERS
Unique Bristled Cleaners
Scrub Holes, Slots & Grooves
The best cleaners we’ve found for pin and screw holes as well as
slots and grooves. Recommended to us by Thomas Getzen, they
have tough plastic bristles worked into traditional pipe cleaners.
Think of them as tiny scrub brushes with built-in mops. After the
bristles loosen dirt and fouling, the mop holds all that crud and
carries it out of the hole. Available in 360 Pak or box of 720.
SPECS: 6" (15.2cm) long x 1 ⁄8" (3.2mm) diameter.
#116-259-000CG 360-pak Pipe Cleaners 6A10P64 ...$ 10.64
#116-000-001CG 1 Box (720) Pipe Cleaners 6A21P57 . 21.57
Shop
otis
brownells.com
Search