FREE POSTER OFFER INSIDE! - Brownells

More documents

Recommendations

Info

mounts & optics 44 AIMPOINT RED DOT OPTICAL SIGHTS Rugged, No-Fail Sight Systems For Tactical Applications Parallax-free aiming with a single, bright glowing red dot; proven to be the fastest, most accurate sighting system available. Exclusive Advanced Circuit Efficiency Technology (ACET) greatly improves the useable life of the single 3-volt battery. ACET sights can last nearly 50,000 hours (over five years on setting 7 out of 10) of constant use. AA battery model can last up to 80,000 hours with a single battery. All sight housings are machined, or extruded from 6000 series aluminum for maximum strength. Lens surfaces are optically ground (not cast) for superior clarity. Proprietary housing and lens sealing material keeps electronic and lens surfaces dry, fog-free and fully functional regardless of weather conditions. All models feature nonreflective, Mil-Spec anodized finishes. 9000SC SERIES - Medium length sight features nine daylight brightness settings, and is ideal for use with any semiauto firearm and weapons that produce extra heavy recoil. 30mm exterior tube diameter helps provide unlimited field of view and eye relief, plus parallax-free aiming at all distances. 9000SC is available with a 4MOA dot and is submersible to 15 feet. 9000SC Camo includes a Realtree ® Max-4 HD camouflage finish, and the objective lens housing is threaded to accept the optional Aimpoint KillFlash ® anti-reflection device. SPECS: Anodized finish, matte black or camouflage. 6.3” (16 cm) long x 2.2” (5.5cm) wide. 7.4 oz. (210 g) wt. 1X magnification. Windage & Elevation: ½” adjustment @ 100 yds. (13mm @ 100m). ACET = 50,000 hrs on one battery. Includes lithium battery (3v, CR 1/3N), rubber flip-up lens covers, two (2) 30mm Weaver-style mounting rings and Allen wrench. Minimum/Maximum C-To-C Ring Spacing: 2” (5cm)/4.5” (15cm). #100-002-968CG 9000SC 4MOA 7A374C41 .........$ 374.41 #100-002-971CG 9000SC Camo 4MOA 7A400H73 ...400.73 9000L SERIES - Provides fast, both eyes open aiming; increased length of body tube provides proper ring spacing on most firearms. Built to shrug off the heaviest recoil. 1X magnification with either a 2MOA or 4MOA dot and submersible to 15 feet. Features an exterior tube diameter of 30mm for maximum field of view and eye relief, plus parallax-free aiming at all ranges with 9 daylight settings. SPECS: Anodized finish, matte black. 7.9” (20 cm) long x 2.2” (5.5cm) wide. 8.1 oz. (230 g) wt. 1X magnification. Windage & Elevation: ½” adjustment @ 100 yds (13mm @ 100m). ACET = 50,000 hrs on one battery. Includes lithium battery (3v, CR 1/3N), rubber flip-up lens covers, two (2) 30mm Weaver-style mounting rings and Allen wrench. Minimum/Maximum C-To-C Ring Spacing: 2.4” (6cm)/6.1” (15.5 cm). #100-002-972CG 9000L 2MOA 7A374H41 ..........$ 374.41 #100-002-973CG 9000 L 4MOA 7A374H41 ..........374.41 COMPM2/COMPML2 SERIES - CompM2 was the first red dot sight rated rugged enough to be adopted by the U.S. Military. Its band pass coated objective lens is fully compatible with all generations of Night Vision Devices, but built for optimum performance with 3rd generation NV technology. Includes 4 NVD and 6 daylight settings. CompML2 is designed for law enforcement and other tactical applications where NV capability is not required, but rough handling and extreme weather conditions are encountered. Both models feature a 4 MOA dot for close quarter combat and 9 daylight settings. CompML2 2X adds fixed, 2X magnification with a 2MOA dot for more precise aiming at smaller targets. Can be quickly converted to a 6X 2MOA illuminated reticle scope by adding the optional 3XMag magnifying module listed below. All models require an Aimpoint 30mm ring or equivalent for installation, ring not included. SPECS: Anodized finish, matte black. CompM2/CompML2 - 5.1” (130 cm) long x 2.2” (5.5cm) wide. 7.8 oz. (220 g) wt. 1X magnification. CompML2 2X - 6.5” (16.5 cm) long x 2.4” (6 cm) wide. 10.3 oz. (280 g) wt. 2X magnification. Windage & Elevation: ½” adjustment @ 100 yds. (13mm @ 100m). ACET = 10,000 hrs on one battery on daylight setting, 50,000 hrs on NV setting. Includes lithium battery (3v, DL 1/3N) and rubber flip-up lens covers. All models submersible to 75 feet (25 m). #100-002-960CG CompM2 4MOA 7A477C91 .......$ 477.91 #100-002-961CG CompML2 4MOA 7A428C12 .......428.12 #100-002-962CG CompML2 2X 2MOA, 7A559C72 ........................559.72 COMPC3 SERIES - Compact red dot sights for up-close, short-range hunting or shooting competitions that demand both speed and accuracy. Built to the same exacting tolerances as the entire Aimpoint line for fail-proof performance. Short length allows easy mounting for a variety of applications; 30mm Weaver-style ring is included. Both models include nine daylight brightness settings, removable lens covers, no-lose windage and elevation dial covers, and a cushioned, rubber ocular lens. Available with 2MOA or 4MOA dot. SPECS: Anodized, matte, black finish. 4.7” (12cm) long x 2.2” (5.5cm) wide x 2.2” high. 7.1 oz. (200g) wt. Windage & Elevation: ½” adjustment @ 100 yds (13mm @ 100m). ACET = 50,000 hrs on one battery. Includes lithium battery (3v, CR 1/3N). Includes 30mm Weaver-style mounting ring and Allen wrench. Submersible to 15 feet (5m). #100-002-976CG #100-002-977CG CompC3 2MOA 4MOA 7A404H28 .......$ ........404.28 404.28 COMPM3/COMPML3 SERIES - CompM3 is a fully redesigned version of the CompM2 and provides up to five years of constant power-on usage from a single battery. Band pass coated objective lens is fully compatible with all generations of night vision devices, but works especially well with 3rd generation NV technology used by military and law enforcement personnel. CompML3 includes multi-layer, anti-reflective lens coatings designed for low light or daylight tactical operations where NV capability is neither required nor practical. Both models are available with 4MOA dot for close combat application or 2MOA dot for improved accuracy at longer distances. Both models include a removable, outer, black rubber armor cover for added protection. All models require an Aimpoint 30mm ring or equivalent for installation. Ring not included. SPECS: Anodized finish, matte black. 5.1” (130 cm) long x 2.2” (5.5cm) wide. 7.8 oz. (220 g) wt. 1X magnification. Windage & Elevation: ½” adjustment @ 100 yds (13mm @ 100m). ACET = 50,000 hrs on one battery on daylight setting, 500,000 hrs on NV setting. Includes lithium battery (3v, DL 1/3N), rubber flip-up lens covers and rubber sight body shield. Submersible to 150 feet (45m). #100-002-963CG CompM3 2MOA 7A540C69 .......$ 540.69 #100-002-964CG CompM3 4MOA 7A540C69 ........540.69 #100-002-965CG CompML3 2MOA 7A469C56 .......469.56 #100-002-966CG CompML3 4 MOA 7A467C99 ...... 467.99 REPLACEMENT RUBBER COVER FOR COMPM3/ML3 - Factory replacement for the removable rubber cover that comes with CompM3/ML3. Replace a worn or damaged cover, or put a Coyote tan cover on your sight to help it blend in on a rifle with a desert camo pattern. SPECS: Synthetic rubber, Black or Coyote (tan). Fits Aimpoint CompM3/ML3 series red dot optical sights. #100-003-607CG Rubber Cover for CompM3/ML3, Black, 7A26H22 .........................$ 26.22 #100-003-606CG Rubber Cover for CompM3/ML3, Coyote, 7A25H89 ..........................25.89 COMPM4/COMPM4S - The latest civilian version of the U.S. Army’s M68 CCO (Close Combat Optic), and the most advanced sight produced by Aimpoint. Super efficient electronics deliver up to eight years of continuous use from a single AA battery. Optics feature band pass objective lens coating for superb light transmission and optimum 3rd generation NVD compatibility. Newly improved rotary brightness switch provides 7 NVD settings and 9 daylight settings, plus one extrabright setting for outdoor use with anti-reflective goggles. Excellent choice for varmint hunters needing a rugged red dot optic with low light capabilities. Integral, QRP2 mount (no additional mount ring required) features a single, oversize thumbscrew for fast installation and removal from Picatinny rails. Mount includes a separate vertical spacer for fast adaptation to a wide range of firearms. Available with versatile 2MOA dot. Can be quickly converted to a 3X, long-range red dot reticle scope by installing the optional Aimpoint 3XMag magnifying module listed below. COMPM4S has the same great operating features as the COMPM4, but positions the battery compartment low, on the right side of the unit for less chance of snagging and improved view over the top of the optic. SPECS: Anodized finish, matte black. 4.7” (120 cm) long x 2.8” (7.2m) wide x 2.8” high. 11.8 oz. (335 g) wt. including mount. 1X magnification. Windage & Elevation: ½” adjustment @ 100 yds (13mm @ 100m). ACET = 80,000 hrs on one battery on daylight setting, 500,000 hrs on NV setting. Includes alkaline battery (1.5v, AA). Submersible to 150 feet (45m). #100-003-002CG CompM4 2MOA 7A729Y00 .......$ 729.00 #100-003-734CG CompM4S 2MOA 7A729P00 .......729.00 3XMAG MAGNIFIER - Mounts on a Picatinny rail directly behind any Aimpoint red dot optical sight to provide 3X magnification for improved accuracy when engaging small targets at long ranges. Durable rubber housing improves gripping surface and shields the module from damage caused by shock. Mounts to rail using a 30mm scope ring or the quick-detach Aimpoint TwistMount listed below. Mounting or dismounting will not change point-of-impact of your sight. Internal adjustments allow alignment with your pre-zeroed sight. Specs: Aluminum, anodized, dark grey, rubber coated, black. 4.3” (11cm) long x 1.7” (4.4cm) high, 1.6” (4.1cm) diameter. 7.1 oz. (200g) wt. Submersible to 67 feet (20m). Requires 30mm mounting ring for installation. #100-002-981CG 3XMag Magnifier 7A519H78 .....$ 519.78 TWISTMOUNT FOR 3X MAGNIFIER - Quickdetach mount for Aimpoint 3x Magnifier lets you change instantly from long-range to CQB mode. Depress the release lever, twist the Magnifier, and lift it off for an unencumbered close-range sight picture. Low-profile base clamps to Picatinny-style rail; extra-long scope ring provides ample surface contact for a no-slip grasp on the magnifier body. May also be used as a quick-detach mount for other 30mm optics. Extra TwistMount bases sold separately, so you can quickly move your Magnifier from one rifle to another. Co-Witness Spacer raises sight axis for proper co-witnessing with factory-height backup iron sights. Comes with four, extra-length hex head screws and Allen wrench. SPECS: Aluminum, hardcoat anodized, matte black. #100-003-597CG TwistMount Complete 7A166T30 .$ 166.30 #100-003-599CG TwistMount Base, only 7A105T30 . . 105.30 #100-003-598CG TwistMount Ring, only 7A81T14 ....81.14 #100-004-137CG Co-Witness Spacer 7A13D12 .......13.12 TENEBRAEX KILLFLASH ® ARD - Anti-Reflection Device screws into front lens opening of 9000SC and Comp series sights. Honeycomb filter disperses light to prevent reflections from front lens giving away your position without adversely affecting sight picture. Fits under lens caps available above. SPECS: Polymer, black. Fits 9000SC and Comp series sights. #100-003-624CG KillFlash ® ARD 7A36V68 ..........$ 36.68 REPLACEMENT LENS COVERS - Replace lost or broken lens cover with the factory original part that came with your Aimpoint. Flip-Up Covers – Spring-loaded, polymer covers that flip open with finger pressure. mil/le supply group Order/Quotes: 1-800-741-0308 Items JPA-SM1C JPA-TANSN JPA-TAS J.P. ENTERPRISES JPOINT MOUNT Expanded Mounting Options & Versatility For JPoint Sight Rugged, lightweight, aluminum mounts allow the proven JPoint Reflex or Trijicon RedDot holographic sights to be mounted piggyback on an ACOG or standarddiameter scope, as well as directly to a flattop receiver. Helps you get an effective secondary sight system that delivers fast, both-eyes-open engagement for close range targets. JPA-TANSN can be installed directly to the TA01NSN model ACOG scope as a standalone mount that replaces the JPA-RAIL existing rear aperture assembly and utilizes the factory mounting holes. Integral, raised “wings” fully guard the sides and top of your JPoint from blows incurred during combat or competition. JPA-TAS Bottom Strap allows the JPA-TANSN mount to be clamped around the eyepiece on all other models of ACOG scopes. JPA-SM1C - Two-piece mount clamps securely around 1" scope tube with four Torx ® head capscrews (wrench included). May be mounted anywhere on scope—behind turret, ahead, or even on the side at a 90° angle. JPA-30C – Same features as SM1C; fits 30mm scope tubes. JPA-RAIL adapter fits any MIL- STD 1913 Picatinny rail and elevates JPoint to correct height for co-witnessing with A2-style iron sights. Includes protective wings and a water-tight compartment for storage of a spare CR- 2032 battery. ab SPECS: Aluminum, black, matte, anodized finish. JPA-TANSN Mount - 1 5 ⁄8" (4.13cm) long, 1¾” (4.4cm) wide, 1 11 ⁄16" (4.3cm) high. Fits TA01NSN model ACOG. Includes wrench, mounting screws, and instructions. JPA-TAS Bottom Strap - 5 ⁄16" (.79cm) long, 1¾” (4.4cm) wide, 7 ⁄8" (2.2cm) high. Includes mounting screws. Requires purchase of JPA-TANSN mount to fit all models of ACOG scopes except TA01NSN. JPA-SM1C – 1 5 ⁄8" (4.1cm) O.A.L, 1¾” (4.5cm) wide, .600” (1.5cm) high from top of scope tube. JPA-30C – 1 5 ⁄8" O.A.L., 1¾” wide, .520” (1.3cm) high from top of scope tube. JPA- RAIL – 1 5 ⁄8" O.A.L., 1 3 ⁄8" (3.5cm) wide, .890” (2.3cm) height from top of receiver to bottom of JPoint. CR-2032 battery included. #452-000-041CG JPA-TANSN Mount, 2E53C00 .........................$ 53.00 #452-000-042CG JPA-TAS Bottom Strap, 2E20C00 ..........................20.00 452-000-060CG JPA-SM1C Mount For 1" Scope Tube, 2E64C88 ..........................64.88 452-000-061CG JPA-SM30C Mnt For 30mm Scope Tube, 2E64H88 ..........................64.88 452-000-062CG JPA-RAIL Rail Mount For A3/A4 Flattop, 2E100H00 ........................100.00 Available in black or see-through clear Tight, friction-fit installation. Fit non-magnifying (1x) 9000 and Comp series, including C3, MPS3, and M4/M4S. Rear covers fit all Aimpoints with 30mm rear objectives, including Comp and 9000 series. Military – One-piece, rubber, slip-on style with loop that fits over quickrelease knob on QRP and QRW mounts. Fits Comp M2, ML2, M3, ML3, M4, and M4S. Micro – One-piece, rubber, “bikini”-style cover for Micro series sights. SPECS: Fits Aimpoint Red Dot sights as indicated above. Flip-Up Covers – Molded polymer, black. Clear models have clear polymer windows in lid. Military & Micro – Rubber, black. #100-003-612CG Flip-Up Front Cover, Black, 7A16Y67 .........................$ 16.67 #100-003-618CG Flip-Up Front Cover, Clear, 7A16V67 ..........................16.67 #100-003-616CG Flip-Up Rear Cover, Black, 7A16Y67 ..........................16.67 #100-003-621CG Flip-Up Rear Cover, Clear, 7A16Y67 ..........................16.67 #100-003-623CG Military Lens Cover, 7A11V46 .......................... 11.46 #100-003-625CG Micro Lens Cover, 7A17V17 ...........................17.17
TRIJICON ® AR-15/M16 ACOG SCOPES Advanced Combat Optical Gunsight Ultra strong, lightweight, forged aluminum housing and the compact design make this the stron gest, most technically advanced, combat gun sight available. Tremendous light transmission and unbeliev able optical clarity rivals many high-quality hunting scopes. Mounts on the AR-15/M16 or AR- 10/SR25 carry handle without modifications. TA01 4x32 - The exclusive Trijicon, self-luminous reticle has a built-in range-finding feature that’s ballistically matched to the 5.56 X 45 NATO cartridge and clearly shows “center-of-mass” aiming points for ranges up to 800 yds. Easy-to-see reticle glows red in low-light conditions. Sight tunnel in mount allows use of standard issue sights. TA01B 4x32 - Features the Trijicon, self-luminous reticle calibrated for 7.62mm NATO ammunition. TA51 Bracket converts standard ACOG for easy mounting on flat top receivers and Weaver-style rails. ab SPECS: 7070-T6 alum. housing, black, anodized. 5.8" (14.7cm) long, 9.9 oz. (280 g) wt. 4X magnification, 32mm objective lens. #892-800-432CG TA01 4x32, 2H873U10 ......................$ 873.10 #892-800-433CG TA01B 4x32, 2H855U40 ....................... 855.40 #892-810-051CG TA51 Bracket, 2H56U00 .........................56.00 TA01NSN 4x32 SPECIAL FORCES - Includes integral peep rear with tritium dot front sight for fast, close range sighting; TA51 mounting bracket easily mounts the ACOG Special Forces on flat top receivers; Includes “bikini”style scope covers and yellow center, range finding reticle to match M4A1 Carbine NSN 1240-01-412-6608. SPECS: 7070-T6 alum. housing, black, anodized. 5.8" (14.7cm) long, 9.9 oz. (280 g) wt. 4X magnification, 32mm objective lens. #892-810-432CG Spec. Forces ACOG, 2H974U99 ......................$ 974.99 TA11 3.5x35 - A larger ACOG with the exclusive Bindon Aiming Concept (BAC) for “quick-as-thinking” aiming. Built-in rangefinding reticle for ranges up to 800 yds. Mounts on the AR-15/M16 handle without modifications; allows use of standard issue sights. SPECS: Forged 7070-T6 aluminum housing, black, anodized, coated lenses. 8" (20cm) long, 14 oz.(396 g) wt. 3.5X magnification, 35mm objective lens. Adjustable for windage and elevation. #892-800-335CG 3.5x35 ACOG, 2H1061U69 ...................$ 1,061.69 TA47 2.0x20 - Lightweight, Compact ACOG, with the exclusive Bindon Aiming Concept (BAC) for quick, both eyes open, aiming. Mounts on the AR-15 carry handle without modifications; allows use of standard issue sights. Dual illumination; fiber optic rod with glowing amber tritium illuminates the aiming Triangle Dot reticle in bright daylight and low light. SPECS: Forged 7070-T6 aluminum housing, black, anodized, coated lenses. 5.3" (13.4cm) long, 5.8 oz.(164 g) wt. 2.0X magnification, 20mm objective lens. Adjustable for windage and elevation. #892-803-220CG 2.0x20 Triangle ACOG, 2H844U00 ......................$ 844.00 TA33 3X30 - Lightweight, compact ACOG combines ample 3X magnification with Bindon Aiming Concept (BAC) for quick, instinctive, both-eyesopen aiming—perfect for a patrol rifle or military carbine. Battery-free ,dual illumination system uses an amber fiber optic rod and glowing tritium lamp to illuminate the reticle in bright daylight and low light. Chevron reticle resembles an upside down “V” and provides the benefits of a triangle reticle while covering less of the target. Mounts to a flattop receiver with the included TA60 Compact ACOG M16 Base Flattop Adapter, which may be removed for installation on carry-handle rifles. Sight tunnel allows use of iron sights with scope on. Available in two models, with bullet drop compensated (BDC) reticles specifically calibrated to the trajectories of .223 and .308 cartridges. SPECS: Forged 7075-T6 aluminum housing, matte black anodized; coated lenses. 61 ⁄8" (15.6cm) long. 7 oz. (198g) weight, scope only. 11.8 oz. (334g) weight including TA60 base. 3x magnification, 30mm objective lens. Adjustable for windage and elevation. TA33-8 - for .223 AR-15/M16. TA33-9 - for AR-type .308 rifles. #892-000-030CG TA33-8, 3x30 Amber Chevron ACOG for .223 2H844Z00 ...............$ 844.00 #892-000-029CG TA33-9, 3x30 Amber Chevron ACOG for .308 2H844D00 ................844.00 TA45 1.5x24 - Compact, tritium and fiber-optic ACOG mounts easily to your AR-15/ M16 carry handle and retains the use of your iron sights. Large, 16mm exit pupil and long eye relief provide great freedom for eye positioning. Bindon Aiming concept (BAC) provides delivers fast acquisition of targets; 1.5X magnification gives a precise sight picture. Available with an amber triangle reticle. SPECS: Forged 7075-T6 aluminum housing, black, anodized; coated lenses. Approximately 5.8" (14.7cm) long, 5.9 oz. (167 g) weight. 1.5X magnification, 24mm objective lens. Adjustable for windage and elevation. #892-000-017CG 1.5x24 Amber Triangle ACOG, 2H854D55 ......................$ 854.55 TA50 3x24 - Lightweight, compact scope attaches right to AR-15/ M16 carry-handle rifles. Allows use of iron sights. 3X magnification power helps identify targets 300 meters away and farther. Includes tritium and fiber optics to provide an excellent, magnified sight picture. Features the Bindon Aiming concept (BAC) to provide rapid target acquisition. Available with a red triangle reticle. SPECS: Forged 7075-T6 aluminum housing, black, anodized; coated lenses. Approx. 5" (12.7cm) long, 5.9 oz. (167 g) wt. 3X magnification, 24mm objective lens. Adjusts for windage and elevation. #892-000-019CG 3x24 Red Triangle ACOG, 2H846D82 ......................$ 846.82 TA31F 4x32 - Compact, 4X magnification scope features a bright, red Chevron reticle that is lit by both fiber optics and tritium for a vivid sight picture at distances up to 800 meters. Uses the Bindon Aiming concept (BAC) for excellent, both-eyes-open, target acquisition. Chevron reticle looks like an upside down “V”; provides similar benefits of triangle reticles without covering up as much of the target. Sight tunnel retains use of iron sights. Mounts to Colt, military-style, flat top rails. SPECS: Forged 7075-T6 aluminum housing, black, anodized; coated lenses. Approximately 5.8" (14.7cm) long, 10 oz. (284 g) weight. 4X magnification, 32mm objective lens. Adjustable for windage and elevation. #892-000-021CG 4x32 Red Chevron ACOG, 2H1099D99 ...................$ 1,099.99 TA31RCO 4x32 - Currently in service as the Rifle Combat Optic (RCO) of the United States Marine Corps, the TA31RCO is designed specifically for the 14.5" barreled M4 carbine. The bright, red, upside down “V” reticle gives fast, instinctive target acquisition at close range, and is bullet drop compensated (BDC) to the trajectory of military-issue 5.56 NATO ammunition for high hit probability out to 800 meters. Features the original TA31’s long eye relief, ample 4x magnification, superior lens clarity, low-light capability, and Bindon Aiming Concept (BAC) for quick, both eyes open, aiming. Mounts to MIL-STD 1913 Picatinny and similar flattop rails; base may be removed to allow installation on carry-handle rifles. Comes with Tenebraex ® Killflash ® shield to stop reflections from the front lens giving away your position, plus rugged, MOLLE-compatible nylon carry case, slip-on Scopecote for protection during storage and transport, Lenspen, and adjuster cap lanyards. SPECS: Forged 7075-T6 aluminum housing, matte black anodized; coated lenses. Approximately 57 ⁄8" (14.9cm) long, 67 ⁄8" (17.5cm) with Killflash installed.. 15.9 oz. (451 g) weight. 4x magnification, 32mm objective lens. Adjustable for windage and elevation. Includes Kill- FLASH, nylon carrying case, Scopecoat, Lenspen, and manual. #892-000-039CG TA31RCO-M4CP 4x32 Red Chevron ACOG 2H1201B22 .............$ 1,201.22 TA648 6x48 - Designed to fulfill the requirements of military and law enforcement precision shooters for outstanding long-range target identification and hit probability. Features ample 6x magnification, superb lens clarity, unbeatable lowlight capability, and Bindon Aiming Concept (BAC) for fast, both-eyes-open aiming. Manual override lets you adjust reticle brightness by rotating the sleeve on the rear eyepiece. The bright, red, chevron (upside down “V”) reticle aids in fast, instinctive target acquisition, with additional bullet drop compensated (BDC) estimated aiming points marked in 100 meter increments starting at 400 meters. .223/5.56 model is calibrated for U.S. military M855 cartridge out to 800 meters. .308/7.62 model is calibrated for U.S. M80 cartridge out to 1,200 meters. Dry nitrogen filled to eliminate fogging, and waterproof to 328 feet (100m). Mounts to MIL-STD 1913 Picatinny and similar flattop rails with the included TA75 base; scope/base may be removed and reinstalled as a unit without loss of zero. SPECS: Forged 7075-T6 aluminum housing, matte black anodized; coated lenses. Approximately 9” (22.9cm) long. 36 oz. (1,021 g) weight. 6x magnification, 48mm objective lens. Adjustable for windage and elevation. Includes TA75 rail adapter, Pelican hardshell carrying case, Lenspen, and manual. #892-000-044CG 6x48 Red Chevron ACOG, 5.56 (.223), 2H1546B66 ....................$ 1,546.66 #892-000-045CG 6x48 Red Chevron ACO, 7.62 (.308), 2H1549B99 ......................1,549.99 ACOG BIKINI COVER - Flexible rubber lens covers seal out unwanted moisture and debris; comes equipped with a rubber pull tab for fast installation and removal. SPECS: Rubber, black. 51 ⁄2" (14cm) long. Fits 4x32 ACOG scopes only. #892-801-052CG ACOG Bikini Cover 2H09U33 ......$ 9.33 RUBBER EYEPIECE FOR ACOG’S - Shades the rear ocular lens for even better definition of the reticle. SPECS: Black rubber. Fits 11 ⁄8" (28.6mm) - 11 ⁄4" (31.8mm) dia. lens. #291-060-100CG ACOG Eyepiece 1B13Y82 .........$ 13.82 call 800-741-0308 for Quotes! TRIJICON ® ACOG REFLEX SIGHT A Bright, Glowing, Aiming Dot In All Conditions, Without Batteries RX01 REFLEX SIGHT - Uses ambient light reflected through a fiber optic, light gathering system, plus glow-inthe-dark Tritium to provide an easyto-see 6.5 MOA amber-colored dot in all light conditions. No batteries to weaken or wear out, no switches to turn on and off. Combat tested, all-machined, aluminum housing is rugged enough to withstand the toughest conditions without failure. Includes lens cleaning pen. Separate mounts allow one Reflex Sight to be used in several applications. No-gunsmithing mounts return to zero after installation and removal. ab SPECS: RX01 Reflex Sight - Aluminum housing, gray, hard-anodized finish, 41 ⁄4" (10.7cm) long, 4.2 oz. (119 g) wt. 24mm objective diameter. Mounts - Aluminum, black, anodized finish. RX10 - Fits AR- 15 carry handle. RX11 - Fits Weaver-style rails, dual locking screws. RX14 - Fits Colt flattop AR-15 receivers, dual locking thumbscrew. #892-110-001CG RX01 Reflex Sight 2H329A99. . . . .$ 329.99 #892-110-010CG RX10 Reflex Mount, 2H121A63 ........................121.63 #892-110-011CG RX11 Reflex Mount, 2H54A67 ..........................54.67 #892-110-014CG RX14 Reflex Mount, 2H96A00 ..........................96.00 TENEBRAEX KILLFLASH GUARD - Anti- reflec tion device prevents glare and reflected images from interfering with sight picture on Reflex sights. ab SPECS: Aluminum, matte, black. Honeycomb screen. .76" (19.3mm) long 1.1" (2.8cm) diameter. #892-802-022CG Killflash 2H33U43 ...............$ 33.43 TENEBRAEX KILLFLASH ANTI-REFLECTIVE DEVICE - Aluminum honeycomb design effectively stops reflective sunlight glint and keeps you from being seen. Minimal light reduction with no loss of field of view and no lost resolution for compact ACOG scopes. SPECS: ABS plastic, aluminum. black. 11 ⁄8" (28.5mm) long, 11 ⁄2" (38mm) diameter. #892-000-023CG KillFLASH Anti-Reflective Device, 2H28D00. . . . . . . . . . . . . . . . . . . . . . . . .$ 28.00 BLACKHAWK HAWKHOOK RESCUE TOOL Compact, Versatile Life-Saving Pocket Tool Compact multi-tool takes up no more space than a small pocket knife, so you’ll always have it in the event of an emergency. Folding blade locks open securely with a flick of your thumb to provide a recessed cutting edge for slicing through seat belts, parachute cords, webbing, rope, and other materials, plus a straight, serrated cutting edge, glass breaker, flat screwdriver/ pry tip, wire-stripper, and a bottle opener. Glass breaker is for breaching automobile side windows and is designed to require a swinging, hammer-like motion that helps prevent over-extending hand through sharp glass. Hardened, stainless steel blade keeps its edge, won’t corrode, and won’t snap off under impact. Handle is made from two stainless steel panels for plenty of strength, with an outer layer of textured black polymer scale for a non-slip grip a sturdy spring-steel belt/pocket clip keeps HawkHook where you put it. SPECS: Blade – AUS 8A stainless steel, matte bead-blasted finish. Handle – 420J stainless, natural matte finish, and textured polymer, black. 5½” (14cm) OAL with blade extended. 2¼” (5.7cm) blade length. 3¼” (8.3cm) OAL folded. 2.5 oz. (72g) weight. #100-003-998CG HawkHook Rescue Tool, 8K29V97 .........................$ 29.97 brownells.com 45 mounts & optics tactical gear
Page 1 and 2: law enforcement 8 FREE FREE POSTER
Page 3 and 4: A A #100-003-524CG MAGPUL UBR BUTTS
Page 5 and 6: ROGGIO ARSENAL AR-15/M16 RA-15 STRI
Page 7 and 8: Br o w n e l l s /DPMS AR-15 BARREL
Page 9 and 10: VLTOR AR-15/M16/AR-STYLE .308 FLASH
Page 11 and 12: Br o w n e l l s AR-15/M16/M4 SPRIN
Page 13 and 14: MAGPUL CTR BUTTSTOCK Locking System
Page 15 and 16: DANIEL DEFENSE AR-15/M16 OMEGA RAIL
Page 17 and 18: FA ENTERPRISES AR-15/M16 HANDGUARD
Page 19 and 20: Mag PRECISION REFLEX, INC. AR-15/M1
Page 21 and 22: XS SIGHT SYSTEMS AR-15/M16 HIGH VIS
Page 23 and 24: WILSON COMBAT AR-15/M16 FLIP-UP SIG
Page 25 and 26: A A #100-003-187CG VLTOR MIL-SPEC E
Page 27 and 28: SPRINGFIELD ARMORY M14/M1A NATIONAL
Page 29 and 30: POWER CUSTOM AK-47 ADJUSTABLE MILIT
Page 31 and 32: TACSTAR SHOTGUN MAGAZINE EXTENSION
Page 33 and 34: ADVANCED TECHNOLOGY PUMP SHOTGUN TA
Page 35 and 36: PACHMAYR COMBAT GRIPS Faster Handli
Page 37 and 38: SPRINGFIELD ARMORY SPRINGFIELD XD F
Page 39 and 40: BLADE TECH SEMI-AUTO PISTOL INJECTI
Page 41 and 42: CRIMSON TRACE AR-15/M16 LASER GRIPS
Page 43 and 44: Models AMERICAN DEFENSE AR-15/M16 Q
Page 45: R&R TARGETS SCOPE THROW LEVERS Easy
Page 49 and 50: Brownells TACTICAL TAPE Secure Temp
Page 51 and 52: COMPETITION ELECTRONICS POCKET PRO
Page 53 and 54: Items Brownells WEAPONS FIELD MAINT
Page 55 and 56: Br o w n e l l s AR-15/M16/M4 BUTTS
Page 57 and 58: Br o w n e l l s TOOLS FOR REMINGTO
Page 59 and 60: ISPECIAL USE MAGNA-TIP ® BITSI ANT
Page 61 and 62: BREAK-FREE CLEANING PRODUCTS Powerf
Page 63 and 64: MIL-COMM WEAPON CARE PRODUCTS Super
Page 65 and 66: C.J. WEAPONS AR-15 GAS TUBE CLEANER
Page 67 and 68: Shop online at brownells.com It’s

FREE POSTER OFFER INSIDE! - Brownells

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?