FREE POSTER OFFER INSIDE! - Brownells
FREE POSTER OFFER INSIDE! - Brownells
FREE POSTER OFFER INSIDE! - Brownells
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
mounts & optics<br />
44<br />
AIMPOINT<br />
RED DOT OPTICAL SIGHTS<br />
Rugged, No-Fail Sight Systems<br />
For Tactical Applications<br />
Parallax-free aiming with a single, bright glowing red dot;<br />
proven to be the fastest, most accurate sighting system available.<br />
Exclusive Advanced Circuit Efficiency Technology (ACET)<br />
greatly improves the useable life of the single 3-volt battery.<br />
ACET sights can last nearly 50,000 hours (over five years on<br />
setting 7 out of 10) of constant use. AA battery model can last<br />
up to 80,000 hours with a single battery. All sight housings are<br />
machined, or extruded from 6000 series aluminum for maximum<br />
strength. Lens surfaces are optically ground (not cast) for<br />
superior clarity. Proprietary housing and lens sealing material<br />
keeps electronic and lens surfaces dry, fog-free and fully functional<br />
regardless of weather conditions. All models feature nonreflective,<br />
Mil-Spec anodized finishes.<br />
9000SC SERIES - Medium length sight<br />
features nine daylight brightness settings,<br />
and is ideal for use with any semiauto<br />
firearm and weapons that produce<br />
extra heavy recoil. 30mm exterior tube<br />
diameter helps provide unlimited field<br />
of view and eye relief, plus parallax-free<br />
aiming at all distances. 9000SC is available with a 4MOA dot<br />
and is submersible to 15 feet. 9000SC Camo includes a Realtree ®<br />
Max-4 HD camouflage finish, and the objective lens housing is<br />
threaded to accept the optional Aimpoint KillFlash ® anti-reflection<br />
device.<br />
SPECS: Anodized finish, matte black or camouflage. 6.3” (16 cm)<br />
long x 2.2” (5.5cm) wide. 7.4 oz. (210 g) wt. 1X magnification. Windage<br />
& Elevation: ½” adjustment @ 100 yds. (13mm @ 100m). ACET<br />
= 50,000 hrs on one battery. Includes lithium battery (3v, CR 1/3N),<br />
rubber flip-up lens covers, two (2) 30mm Weaver-style mounting<br />
rings and Allen wrench. Minimum/Maximum C-To-C Ring Spacing:<br />
2” (5cm)/4.5” (15cm).<br />
#100-002-968CG 9000SC 4MOA 7A374C41 .........$ 374.41<br />
#100-002-971CG 9000SC Camo 4MOA 7A400H73 ...400.73<br />
9000L SERIES - Provides fast, both eyes open<br />
aiming; increased length of body tube provides<br />
proper ring spacing on most firearms.<br />
Built to shrug off the heaviest recoil.<br />
1X magnification with either a 2MOA<br />
or 4MOA dot and submersible to 15 feet.<br />
Features an exterior tube diameter of 30mm for maximum field<br />
of view and eye relief, plus parallax-free aiming at all ranges<br />
with 9 daylight settings.<br />
SPECS: Anodized finish, matte black. 7.9” (20 cm) long x 2.2”<br />
(5.5cm) wide. 8.1 oz. (230 g) wt. 1X magnification. Windage & Elevation:<br />
½” adjustment @ 100 yds (13mm @ 100m). ACET = 50,000<br />
hrs on one battery. Includes lithium battery (3v, CR 1/3N), rubber<br />
flip-up lens covers, two (2) 30mm Weaver-style mounting rings<br />
and Allen wrench. Minimum/Maximum C-To-C Ring Spacing: 2.4”<br />
(6cm)/6.1” (15.5 cm).<br />
#100-002-972CG 9000L 2MOA 7A374H41 ..........$ 374.41<br />
#100-002-973CG 9000 L 4MOA 7A374H41 ..........374.41<br />
COMPM2/COMPML2 SERIES - CompM2<br />
was the first red dot sight rated rugged<br />
enough to be adopted by the U.S. Military. Its<br />
band pass coated objective lens is fully compatible<br />
with all generations of Night Vision<br />
Devices, but built for optimum performance<br />
with 3rd generation NV technology. Includes<br />
4 NVD and 6 daylight settings. CompML2 is<br />
designed for law enforcement and other tactical<br />
applications where NV capability is not required, but rough<br />
handling and extreme weather conditions are encountered. Both<br />
models feature a 4 MOA dot for close quarter combat and 9 daylight<br />
settings. CompML2 2X adds fixed, 2X magnification with<br />
a 2MOA dot for more precise aiming at smaller targets. Can be<br />
quickly converted to a 6X 2MOA illuminated reticle scope by<br />
adding the optional 3XMag magnifying module listed below. All<br />
models require an Aimpoint 30mm ring or equivalent for installation,<br />
ring not included.<br />
SPECS: Anodized finish, matte black. CompM2/CompML2 - 5.1”<br />
(130 cm) long x 2.2” (5.5cm) wide. 7.8 oz. (220 g) wt. 1X magnification.<br />
CompML2 2X - 6.5” (16.5 cm) long x 2.4” (6 cm) wide. 10.3 oz.<br />
(280 g) wt. 2X magnification. Windage & Elevation: ½” adjustment<br />
@ 100 yds. (13mm @ 100m). ACET = 10,000 hrs on one battery on<br />
daylight setting, 50,000 hrs on NV setting. Includes lithium battery<br />
(3v, DL 1/3N) and rubber flip-up lens covers. All models submersible<br />
to 75 feet (25 m).<br />
#100-002-960CG CompM2 4MOA 7A477C91 .......$ 477.91<br />
#100-002-961CG CompML2 4MOA 7A428C12 .......428.12<br />
#100-002-962CG CompML2 2X 2MOA,<br />
7A559C72 ........................559.72<br />
COMPC3 SERIES - Compact red dot sights<br />
for up-close, short-range hunting or shooting<br />
competitions that demand both speed<br />
and accuracy. Built to the same exacting<br />
tolerances as the entire Aimpoint line<br />
for fail-proof performance. Short length<br />
allows easy mounting for a variety of<br />
applications; 30mm Weaver-style ring is<br />
included. Both models include nine daylight brightness settings,<br />
removable lens covers, no-lose windage and elevation dial covers,<br />
and a cushioned, rubber ocular lens. Available with 2MOA<br />
or 4MOA dot.<br />
SPECS: Anodized, matte, black finish. 4.7” (12cm) long x 2.2”<br />
(5.5cm) wide x 2.2” high. 7.1 oz. (200g) wt. Windage & Elevation:<br />
½” adjustment @ 100 yds (13mm @ 100m). ACET = 50,000 hrs on<br />
one battery. Includes lithium battery (3v, CR 1/3N). Includes 30mm<br />
Weaver-style mounting ring and Allen wrench. Submersible to 15<br />
feet (5m).<br />
#100-002-976CG #100-002-977CG CompC3 2MOA 4MOA 7A404H28 .......$ ........404.28 404.28<br />
COMPM3/COMPML3 SERIES - CompM3<br />
is a fully redesigned version of the<br />
CompM2 and provides up to five years<br />
of constant power-on usage from a single<br />
battery. Band pass coated objective lens<br />
is fully compatible with all generations of<br />
night vision devices, but works especially<br />
well with 3rd generation NV technology<br />
used by military and law enforcement<br />
personnel. CompML3 includes multi-layer, anti-reflective lens<br />
coatings designed for low light or daylight tactical operations<br />
where NV capability is neither required nor practical. Both models<br />
are available with 4MOA dot for close combat application<br />
or 2MOA dot for improved accuracy at longer distances. Both<br />
models include a removable, outer, black rubber armor cover for<br />
added protection. All models require an Aimpoint 30mm ring or<br />
equivalent for installation. Ring not included.<br />
SPECS: Anodized finish, matte black. 5.1” (130 cm) long x 2.2”<br />
(5.5cm) wide. 7.8 oz. (220 g) wt. 1X magnification. Windage & Elevation:<br />
½” adjustment @ 100 yds (13mm @ 100m). ACET = 50,000<br />
hrs on one battery on daylight setting, 500,000 hrs on NV setting.<br />
Includes lithium battery (3v, DL 1/3N), rubber flip-up lens covers and<br />
rubber sight body shield. Submersible to 150 feet (45m).<br />
#100-002-963CG CompM3 2MOA 7A540C69 .......$ 540.69<br />
#100-002-964CG CompM3 4MOA 7A540C69 ........540.69<br />
#100-002-965CG CompML3 2MOA 7A469C56 .......469.56<br />
#100-002-966CG CompML3 4 MOA 7A467C99 ...... 467.99<br />
REPLACEMENT RUBBER COVER FOR COMPM3/ML3 - Factory<br />
replacement for the removable rubber<br />
cover that comes with CompM3/ML3.<br />
Replace a worn or damaged cover, or put<br />
a Coyote tan cover on your sight to help<br />
it blend in on a rifle with a desert camo<br />
pattern.<br />
SPECS: Synthetic rubber, Black or Coyote<br />
(tan). Fits Aimpoint CompM3/ML3 series<br />
red dot optical sights.<br />
#100-003-607CG Rubber Cover for CompM3/ML3, Black,<br />
7A26H22 .........................$ 26.22<br />
#100-003-606CG Rubber Cover for CompM3/ML3, Coyote,<br />
7A25H89 ..........................25.89<br />
COMPM4/COMPM4S - The latest civilian<br />
version of the U.S. Army’s M68 CCO (Close<br />
Combat Optic), and the most advanced<br />
sight produced by Aimpoint. Super efficient<br />
electronics deliver up to eight years of continuous<br />
use from a single AA battery. Optics<br />
feature band pass objective lens coating for<br />
superb light transmission and optimum 3rd generation NVD<br />
compatibility. Newly improved rotary brightness switch provides<br />
7 NVD settings and 9 daylight settings, plus one extrabright<br />
setting for outdoor use with anti-reflective goggles. Excellent<br />
choice for varmint hunters needing a rugged red dot optic<br />
with low light capabilities. Integral, QRP2 mount (no additional<br />
mount ring required) features a single, oversize thumbscrew for<br />
fast installation and removal from Picatinny rails. Mount includes<br />
a separate vertical spacer for fast adaptation to a wide<br />
range of firearms. Available with versatile 2MOA dot. Can be<br />
quickly converted to a 3X, long-range red dot reticle scope by installing<br />
the optional Aimpoint 3XMag magnifying module listed<br />
below. COMPM4S has the same great operating features as the<br />
COMPM4, but positions the battery compartment low, on the<br />
right side of the unit for less chance of snagging and improved<br />
view over the top of the optic.<br />
SPECS: Anodized finish, matte black. 4.7” (120 cm) long x 2.8”<br />
(7.2m) wide x 2.8” high. 11.8 oz. (335 g) wt. including mount. 1X<br />
magnification. Windage & Elevation: ½” adjustment @ 100 yds<br />
(13mm @ 100m). ACET = 80,000 hrs on one battery on daylight<br />
setting, 500,000 hrs on NV setting. Includes alkaline battery (1.5v,<br />
AA). Submersible to 150 feet (45m).<br />
#100-003-002CG CompM4 2MOA 7A729Y00 .......$ 729.00<br />
#100-003-734CG CompM4S 2MOA 7A729P00 .......729.00<br />
3XMAG MAGNIFIER - Mounts on a Picatinny rail directly behind<br />
any Aimpoint red dot optical sight<br />
to provide 3X magnification for improved<br />
accuracy when engaging small targets at<br />
long ranges. Durable rubber housing improves<br />
gripping surface and shields the<br />
module from damage caused by shock.<br />
Mounts to rail using a 30mm scope ring or the quick-detach<br />
Aimpoint TwistMount listed below. Mounting or dismounting<br />
will not change point-of-impact of your sight. Internal adjustments<br />
allow alignment with your pre-zeroed sight.<br />
Specs: Aluminum, anodized, dark grey, rubber coated, black. 4.3”<br />
(11cm) long x 1.7” (4.4cm) high, 1.6” (4.1cm) diameter. 7.1 oz. (200g)<br />
wt. Submersible to 67 feet (20m). Requires 30mm mounting ring<br />
for installation.<br />
#100-002-981CG 3XMag Magnifier 7A519H78 .....$ 519.78<br />
TWISTMOUNT FOR 3X MAGNIFIER - Quickdetach<br />
mount for Aimpoint 3x Magnifier<br />
lets you change instantly from long-range to<br />
CQB mode. Depress the release lever, twist<br />
the Magnifier, and lift it off for an unencumbered<br />
close-range sight picture. Low-profile<br />
base clamps to Picatinny-style rail; extra-long<br />
scope ring provides ample surface contact for a<br />
no-slip grasp on the magnifier body. May also<br />
be used as a quick-detach mount for other 30mm optics. Extra<br />
TwistMount bases sold separately, so you can quickly move your<br />
Magnifier from one rifle to another. Co-Witness Spacer raises<br />
sight axis for proper co-witnessing with factory-height backup<br />
iron sights. Comes with four, extra-length hex head screws and<br />
Allen wrench.<br />
SPECS: Aluminum, hardcoat anodized, matte black.<br />
#100-003-597CG TwistMount Complete 7A166T30 .$ 166.30<br />
#100-003-599CG TwistMount Base, only 7A105T30 . . 105.30<br />
#100-003-598CG TwistMount Ring, only 7A81T14 ....81.14<br />
#100-004-137CG Co-Witness Spacer 7A13D12 .......13.12<br />
TENEBRAEX KILLFLASH ® ARD - Anti-Reflection<br />
Device screws into front lens opening of 9000SC<br />
and Comp series sights. Honeycomb filter disperses<br />
light to prevent reflections from front lens<br />
giving away your position without adversely affecting<br />
sight picture. Fits under lens caps available<br />
above.<br />
SPECS: Polymer, black. Fits 9000SC and Comp series sights.<br />
#100-003-624CG KillFlash ® ARD 7A36V68 ..........$ 36.68<br />
REPLACEMENT LENS COVERS - Replace lost or broken lens<br />
cover with the factory<br />
original part that<br />
came with your Aimpoint.<br />
Flip-Up Covers –<br />
Spring-loaded, polymer<br />
covers that flip open<br />
with finger pressure.<br />
mil/le supply group Order/Quotes: 1-800-741-0308<br />
Items<br />
JPA-SM1C<br />
JPA-TANSN<br />
JPA-TAS<br />
J.P. ENTERPRISES<br />
JPOINT MOUNT<br />
Expanded Mounting<br />
Options & Versatility For JPoint Sight<br />
Rugged, lightweight, aluminum mounts<br />
allow the proven JPoint Reflex or Trijicon<br />
RedDot holographic sights to be mounted<br />
piggyback on an ACOG or standarddiameter<br />
scope, as well as directly to a<br />
flattop receiver. Helps you get an effective<br />
secondary sight system that<br />
delivers fast, both-eyes-open<br />
engagement for close range<br />
targets. JPA-TANSN can be installed<br />
directly to the TA01NSN<br />
model ACOG scope as a standalone<br />
mount that replaces the<br />
JPA-RAIL<br />
existing rear aperture assembly<br />
and utilizes the factory mount-<br />
ing holes. Integral, raised “wings” fully guard the sides and top<br />
of your JPoint from blows incurred during combat or competition.<br />
JPA-TAS Bottom Strap allows the JPA-TANSN mount to<br />
be clamped around the eyepiece on all other models of ACOG<br />
scopes. JPA-SM1C - Two-piece mount clamps securely around<br />
1" scope tube with four Torx ® head capscrews (wrench included).<br />
May be mounted anywhere on scope—behind turret, ahead, or<br />
even on the side at a 90° angle. JPA-30C – Same features as<br />
SM1C; fits 30mm scope tubes. JPA-RAIL adapter fits any MIL-<br />
STD 1913 Picatinny rail and elevates JPoint to correct height<br />
for co-witnessing with A2-style iron sights. Includes protective<br />
wings and a water-tight compartment for storage of a spare CR-<br />
2032 battery. ab<br />
SPECS: Aluminum, black, matte, anodized finish. JPA-TANSN<br />
Mount - 1 5 ⁄8" (4.13cm) long, 1¾” (4.4cm) wide, 1 11 ⁄16" (4.3cm) high.<br />
Fits TA01NSN model ACOG. Includes wrench, mounting screws,<br />
and instructions. JPA-TAS Bottom Strap - 5 ⁄16" (.79cm) long, 1¾”<br />
(4.4cm) wide, 7 ⁄8" (2.2cm) high. Includes mounting screws. Requires<br />
purchase of JPA-TANSN mount to fit all models of ACOG scopes<br />
except TA01NSN. JPA-SM1C – 1 5 ⁄8" (4.1cm) O.A.L, 1¾” (4.5cm)<br />
wide, .600” (1.5cm) high from top of scope tube. JPA-30C – 1 5 ⁄8"<br />
O.A.L., 1¾” wide, .520” (1.3cm) high from top of scope tube. JPA-<br />
RAIL – 1 5 ⁄8" O.A.L., 1 3 ⁄8" (3.5cm) wide, .890” (2.3cm) height from top<br />
of receiver to bottom of JPoint. CR-2032 battery included.<br />
#452-000-041CG JPA-TANSN Mount,<br />
2E53C00 .........................$ 53.00<br />
#452-000-042CG JPA-TAS Bottom Strap,<br />
2E20C00 ..........................20.00<br />
452-000-060CG JPA-SM1C Mount For 1" Scope Tube,<br />
2E64C88 ..........................64.88<br />
452-000-061CG JPA-SM30C Mnt For 30mm Scope Tube,<br />
2E64H88 ..........................64.88<br />
452-000-062CG JPA-RAIL Rail Mount For A3/A4 Flattop,<br />
2E100H00 ........................100.00<br />
Available in black or see-through clear Tight, friction-fit installation.<br />
Fit non-magnifying (1x) 9000 and Comp series, including<br />
C3, MPS3, and M4/M4S. Rear covers fit all Aimpoints with<br />
30mm rear objectives, including Comp and 9000 series. Military<br />
– One-piece, rubber, slip-on style with loop that fits over quickrelease<br />
knob on QRP and QRW mounts. Fits Comp M2, ML2,<br />
M3, ML3, M4, and M4S. Micro – One-piece, rubber, “bikini”-style<br />
cover for Micro series sights.<br />
SPECS: Fits Aimpoint Red Dot sights as indicated above. Flip-Up<br />
Covers – Molded polymer, black. Clear models have clear polymer<br />
windows in lid. Military & Micro – Rubber, black.<br />
#100-003-612CG Flip-Up Front Cover, Black,<br />
7A16Y67 .........................$ 16.67<br />
#100-003-618CG Flip-Up Front Cover, Clear,<br />
7A16V67 ..........................16.67<br />
#100-003-616CG Flip-Up Rear Cover, Black,<br />
7A16Y67 ..........................16.67<br />
#100-003-621CG Flip-Up Rear Cover, Clear,<br />
7A16Y67 ..........................16.67<br />
#100-003-623CG Military Lens Cover,<br />
7A11V46 .......................... 11.46<br />
#100-003-625CG Micro Lens Cover,<br />
7A17V17 ...........................17.17