POS Optional Device - toshiba tec europe

9. FLOPPY DISK DRIVE9.1 FDDST-60 Series Basic SpecificationEO21-12001DPOS Optional DeviceDescription of Model NameFDDST - 60 -1 - QM - RFDD TypeFloppy Disk Drive*1: RoHS ComplianceBlank: Non-RoHS compliant modelR: RoHS compliant modelStandard Model• FDDST-60-1-QM• FDDST-60-1-QM-R*1Destination Code:QM: Worldwide modelNOTE: Some combinations of the above specifications are not releasedas products. For details, please refer to your nearest authorizedTOSHIBA TEC representative.FDD SizeDimensionsWeight101.6mm(W) x 146mm(D) x 16.7mm(H)250 g (without Cable)Carton Size (for 20 units/carton)Dimensions 400mm(W) x 370mm(D) x 220mm(H)Weight 0.5KgFDD SpecificationPower DC5V, 1.0AConsumptionLogoTECRating Label Language:• English FrenchColor of Covers BlackOwner’s • Not providedManual English French German SpanishConnector 26 pinInterface Output: C-MOS 3-state driversInput: pull-up resistorsItem 2MB mode 1MB modeCapacity2MB1MB(Unformatted)(Formatted)256 bytes/sector512 bytes/sector1024 bytes/sector---1474.6KB/18---655.4KB/16737.3KB/9819.2KB/5Recording density 17434 BPI 8717 BPITrack density135 TPINumber of cylinders80 cylindersNumber of tracks160 tracksRecording methodMFMType of recording 2HD2DDmediaRotational speed300 rpmData transfer speed 500K bits/sec. 250K bits/sec.Average rotational100 msstarting timeAccess timeAverage access timeTrack-to-track traveltimeSetting timeMax motor startingtime94 ms3 ms15 ms500 msAccessoriesItemQuantityFDD Cable 1NOTE:• All company and/or products names are trademarks and/or registered trademarks of their respective owners.• All features and specifications described on this document are subjected to change without notice.• For details, please contact TOSHIBA TEC Sales Department.9-1