PSK Handbook

More documents

Recommendations

Info

4.2.5.4.2. Transmit Text Font The following dialog is used to select the font and color for text that has yet to be transmitted. Many fonts are not suitable for <strong>PSK</strong>31 and may not contain the correct ASCII characters. 4.2.5.4.3. Sent Text Font The following dialog is used to select the font and color for text that has already been transmitted. As text is sent to the transmitter, it's font is changed in order to distinguish it from text that has been typed ahead and not yet sent. Also this font color is used in the receive window to distinguish between received and transmitted text. ( The receive window font is used, just the color is changed ) 7/27/01 Moe Wheatley, AE4JY 15
4.2.5.4.4. Background colors Both the receive text window and transmit text window's background color can be selected using the following dialog box. Some care must be exercised to make sure the font color has good contrast against this background color. 4.2.6. Clear Rcv Menu Item This menu item will clear(permanently) the contents of the receive edit window. It can also be activated by pressing Alt-R. 4.2.7. Clear Xmit Menu Item This menu item will clear(permanently) the contents of the transmit edit window. It can also be activated by pressing Alt-X. 4.2.8. Tx Tune Menu This control will turn on the transmitter and output a single frequency tone. This can be used to tune ones transmitter for best SWR, etc. Note: This is NOT a useful test signal for setting ones audio output level for minimum IMD. The <strong>PSK</strong>31 "idle" tones should be used for that. They can be generated by pressing the F12 Rx/Tx button and then not typing any characters. A steady two tone signal is then generated. off. Pressing the TX Tune menu item while it is already in the Tune mode will turn it and the transmitter 4.2.9. Send File Pressing this brings up a file selection menu. Selecting a text file will place the contents of that text file into the TX window. All of the macro keywords are available to use in a text file to be transmitted. This gives an almost infinite number of alternate macros to use. 4.2.10. Help Menu This menu accesses this document or an "about box" that gives the program version information. 7/27/01 Moe Wheatley, AE4JY 16
Page 1 and 2: The HANDBOOK of HAM RADIO Sound Car
Page 3 and 4: What is PSK31? The software that im
Page 5 and 6: AND, IT’S ALMOST FREE: When the p
Page 7 and 8: (WHITE) 3.5 mm Stereo plug TIP Soun
Page 9 and 10: Another consideration that influenc
Page 11 and 12: (WHITE) 3.5 mm Stereo plug TIP Soun
Page 13 and 14: AFTER YOUR RASCAL INTERFACE IS CONN
Page 15 and 16: Addendum “A” Building an interf
Page 17 and 18: UNDERSTANDING DIODE MARKINGS AND IN
Page 19 and 20: NOTES: PC board is available at; ww
Page 21 and 22: Fine Tuning, or initial receive and
Page 23 and 24: Table Of contents 1. GETTING STARTE
Page 25 and 26: Here is a properly tuned in BPSK si
Page 27 and 28: 2.2. PTT Interface One can use thei
Page 29 and 30: You should now be able to start rec
Page 31 and 32: 4.2. Menu Items 4.2.1. File Menu Th
Page 33 and 34: 4.2.5.1. General Setup 4.2.5.1.1. U
Page 35: 4.2.5.2. Rx Level Adjust Activates
Page 39 and 40: within most of the audio bandwidth
Page 41 and 42: 4.3.2.4. Input View The Input view
Page 43 and 44: BPSK---Binary PSK mode that does no
Page 45 and 46: The Tx Offset mode is useful for tr
Page 47 and 48: 4.4.6.1. Macro Setup The following
Page 49 and 50: Power 10 0 10 20 30 40 50 60 70 80
Page 51 and 52: 5. Operation Hints and Tips The bes
Page 53: References: Several sources are ava

PSK Handbook

Create successful ePaper yourself

Delete template?

Save as template?