Assembly Instruction- Desk - Steelcase Village

Operation Electrical Height AdjustmentPOSSIBLE DAMAGE TO THE DESKIn the event of the desk-top moving one-sidedly or irregularly:• release the key immediately to stop the motion!• ascertain the cause by referring to the Fault FindingTable (refer 7.2 Fault Indications on the Display and7.3 Other Faults)• if necessary call a service technician6.5.3 Changing Display Mode to Centimeter or InchYou can choose desk height to be indicated in inch or centimeter.To change display mode proceed according to the table below:ActionFor example:Display indicates „27“ for desk height of27 inch.You wish to change to cm-display mode.Indication onDisplayExample:1. Change betweeen cm and inch:Press and hold .„S“ blinks on display.2 Selected height appears in inch afterapprox. 5 sec. For example „68“ indicatesdisk height of 68 cm.Example:32 Tenaro © 10/2004