Assembly Instruction- Desk - Steelcase Village

Operation Electrical Height Adjustment6.5.4 Setting Position in MemoryThree positions can be set in the memory.Short form instructions on how to set positions and call up programmedpositions can be found at the back of the control panel.ActionIndication onDisplay1. Select height:Example:Press or ,until required height is indicated.2. Save position:PressDisplay starts to blink for approx. 3 sec.3.Press for position 1,while „S“ is blinking;orPress for position 2,while „S“ is blinking;orPress for position 3,while „S“ is blinking.The position is now saved in control memory. This is indicated on thedisplay.Tenaro © 10/2004 33