Assembly Instruction- Desk - Steelcase Village
Assembly Instruction- Desk - Steelcase Village
Assembly Instruction- Desk - Steelcase Village
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Defects and FaultsDefects / Faults Possible Cause Measures<strong>Desk</strong> can only beloweredControl has lost data • Disconnect power cable• Reconnect power cable• Conduct reference drive(refer 6.4.1 ReferenceDrive „up“/„down“ withcontrol panel or 6.5.1Reference Drive withOperating Panel 3-PositionMemory)Lifting / loweringprocess is jerky<strong>Desk</strong> constructionis unstable<strong>Desk</strong> construction is twisted,caused by incorrect assemblingCenter Bridge is not insertedproperly(hammer must be used forassembling)• Loosen screws• Move to top position• Move to bottom position• Tighten screws• Loosen screws• Move to top position• Move to bottom position• Tighten screwsScrews are loose • Loosen screws• Move to top position• Move to bottom position• Tighten screwsLifting / loweringprocess is onesidedor unevenFault in controlHeavy one-sided loadStop lifting / lowering processimmediately;Call Customer Service (refer9.2 Repairs and Spare Parts)Remove or centre load, thenlift or lower desk until it stopsautomatically.38 Tenaro © 10/2004
Change language